Instrukcja obsługi Adastra CC8V


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Adastra CC8V (1 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.3 gwiazdek

Strona 1/1
Installation Guide -series plifier and 100V Ceiling Speakers UM Am
The 6V ceiling speakers shown above are all 100V type, connected from the COM and 100V output terminals of the amplifier as shown. CC
The ceiling speakers are connected in parallel and the same applies for packages with different numbers of speakers. se 4
Each speaker has a rotary tapping switch to set the maximum Wattage it demands from the amplifier .
Th RM amplifier shown has 4 separate switchable output 100V terminals only the first is shown connected here. e ,
If the FM tuner is to be used, it is recommended to connect an external FM aerial to the F-connector labelled ANTENNA . “ ”
Microphones and line inputs can be connected on the input section. Enable phantom power if a condenser microphone is connected to MIC.1
A pair of RCA connectors on the rear panel labelled LINE O can be used to link the signal mix onto a further amplifier. UT
A 24V trigger from an emergency panel may be connected to the 24V EMG MUTE terminals to mute all except MIC1 in an emergency.
Where mains power is not available, a Vdc supply may be connected to screw terminals at the rear as an alternative power source. 24


Specyfikacje produktu

Marka: Adastra
Kategoria: głośnik
Model: CC8V

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Adastra CC8V, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą