Instrukcja obs艂ugi Alpine KTX-H12

Alpine subwoofer KTX-H12

Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Alpine KTX-H12 (4 stron) w kategorii subwoofer. Ta instrukcja by艂a pomocna dla 30 os贸b i zosta艂a oceniona przez 15.5 u偶ytkownik贸w na 艣rednio 4.7 gwiazdek

Strona 1/4
IMPORTANT NOTICE!
PLEASE READ FIRST BEFORE INSTALLING LINK KIT
Congratulations on your purchase from Alpine. Your listening satisfaction is
important to us. In order to ensure proper installation
of
your new enclosure the
following guidelines are being provided. Please read this notice carefully
before installing the link kit or remounting the subwoofer.
1.) When installing your provided linking kit follow the steps in the instruction
manual.
2.)Avoid over tightening screws
-
If
remounting a subwoof er or installing a linking each kit start provided
machine screw thread by hand with the included hex key wrench.
- Once each screw is started use a drill torque setting
of
low to fasten.
3.)Do not use an Impact Driver Drill for hardware Installation.
4.)Ifusing the KTE-l0G, or KTE-12G Grille Kit do not use the supplied wood
screws, instead use the 40mm machine screws pre-installed with the enclosure.
5.
)Each Enclosure is wired to a 2 Ohm Load,
if
enclosures are wired in parallel
check that your amplifier is 1 Ohm Stable.
Failure to follow these guidelines may result in enclosure damage which will
void your warranty.
If
further assistance is necessary, please contact your Alpine authorized dealer.


Specyfikacje produktu

Marka: Alpine
Kategoria: subwoofer
Model: KTX-H12

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z Alpine KTX-H12, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮