Instrukcja obsługi Artsound PRL-1202

Artsound odbiornik PRL-1202

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Artsound PRL-1202 (8 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.4 gwiazdek

Pobierz PDF

Strona 1/8

Operating Manual

PRL-1202 / PRL-1204

MULTICHANNEL AMPLIFIER 2/4

Please follow the instructions in this manual to obtain the optimum

results from this unit.

We also recommend that you keep this manual handy for future reference

Check our website for any updates of this manual: www.artsound.be

House of Music nv

Ronse, Belgium

www.artsound.be

Tel. +32 9 380 81 80

Fax. +32 9 386 12 35

info@artsound.be

PRL-1202 / PRL-1204

Table of contents

1. Safety precautions 3

2. General description 4

3. Characteristics 4

4. Nomenclature and functions 5

4.1 Front panel 5

4.2 Rear panel 5

5. Use cases 6

8. Specications 7

PRL-1202 / PRL-1204

1 Safety precautions.

• Be sure to read the instructions in this section carefully before use.

• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded

as very important precautions are included.

• We also recommend you keep this instruction manual handy for future reference.

Warnings and safety.

Safety Symbol and Message Conventions.

Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage,

which could result from mishandling. Before operating your product, read this manual rst and understand the safety

symbols and messages so you are thoroughly aware of the potential safety risk.

Warning.

When Installing the Unit.

• Do not expose the unit to rain or an environment

where it may be splashed by water or other liquids, as

doing so may result in re or electric shock.

• Use the unit only with the voltage specied on the unit.

Using a voltage higher than that which is specied may

result in re or electric shock.

• Do not cut, kink, otherwise damage nor modify the

power supply cord. In addition, avoid using the power

cord in close proximity to heaters, and never place

heavy objects -- including the unit itself -- on the pow-

er cord, as doing so may result in re or electric shock.

• Be sure to replace the unit’s terminal cover after

connection completion. Because high voltage is applied

to the speaker terminals, never touch these terminals

to avoid electric shock.

• Be sure to ground to the safety ground (earth) terminal

to avoid electric shock. Never ground to a gas pipe as a

catastrophic disaster may result.

• Avoid installing or mounting the unit in unstable

locations, such as on a rickety table or a slanted

surface. Doing so may result in the unit falling down,

causing personal injury and/or property damage.



Warning

Indicates a potentially hazardous situation which, if mishandled, could result in death or serious

personal injury.

Caution

Indicates a potentially hazardous situation which, if mishandled, could result in moderate or

minor personal injury, and/or property damage.

When the Unit is in Use.

• Should the following irregularity be found during use,

immediately switch off the power, disconnect the power

supply plug from the AC outlet and contact your near-

est ArtSound dealer. Make no further attempt to oper-

ate the unit in this condition as this may cause re or

electric shock.

• If you detect smoke or a strange smell coming from

the unit.

• If water or any metallic object gets int o the unit

• If the unit falls, or the unit case breaks

• If the power supply cord is damaged (exposure of

the core, disconnection, etc. )

• If it is malfunctioning (no tone sounds.)

• To prevent a re or electric shock, never open nor

remove the unit case as there are high voltage

components inside the unit. Refer all servicing to your

nearest ArtSound dealer.

• Do not place cups, bowls, or other containers of liquid

or metallic objects on top of the unit. If they acciden-

tally spill into the unit, this may cause a re or electric

shock.

• Do not insert nor drop metallic objects or ammable

materials in the ventilation slots of the unit’s cover, as

this may result in re or electric shock.

Specyfikacje produktu

Marka:	Artsound
Kategoria:	odbiornik
Model:	PRL-1202
Kolor produktu:	Czarny
Wbudowany wyłącznik:	Tak
Napięcie wejściowe AC:	220 V
Wysokość produktu:	44 mm
Szerokość produktu:	483 mm
Głębokość produktu:	250 mm
Waga produktu:	3500 g
Technologia łączności:	Przewodowa
Przeznaczenie:	Dom
Kanały wyjścia audio:	2.0 kan.
Wejście XLR:	Tak
Diody LED:	Tak
Rodzaj chłodzenia:	Aktywne
Moc szczytowa na kanał:	- W
Klasa wzmacniacza:	D
Współczynnik zawartości harmonicznych:	- %
Stosunek sygnału do szumu:	- dB
Zasięg częstotliwości:	20 - 20000 Hz
Impedencja wyjścia:	4-8 Ω
Typ podłączenia głośników:	Oprawa postu
Moc wyjściowa RMS na kanał (4 Ohm):	200 W
Moc wyjściowa RMS na kanał (8 Ohm):	120 W
Pojemność stelaża:	1U
Funkcja pomostowa:	Tak
Funkcje ochrony zasilania:	Ochrona przez zbyt wysokim napięciem
Ilość portów speakon:	1