Instrukcja obsługi Audio-Technica ATM73a


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica ATM73a (2 stron) w kategorii Słuchawki. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
CARDIOID CONDENSER HEADWORN MICROPHONE
- Ideal for drummers, keyboard players or anyone requiring hands-free
operation.
- Comfortable, unobtrusive headband design with side-of-mouth pickup.
- Belt-mounted power module operates on battery or phantom power.
- Cardioid polar pattern improving isolation of desired sound source.
- Also available as: ATM73cW - less power module; 1.4m cable terminated
with locking 4-pin connector for A-T UniPak
wireless systems.
The ATM73a required 11V to 52V DC phantom power or a 1.5V AA
battery for operation. A battery need not be in place for phantom power
operation.
Battery installation: Remove the cap from the top of the power module.
Insert a fresh 1.5V AA battery (“+” end toward the cap release button),
then reassemble the power module. Alkaline batteries are recommended
for longest lift. Remove the battery during long-term storage.
Output from the power module’s XLRM-type connector is low impedance
(Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is ground
(shield). Output phase is “Pin 2 hot” - positive acoustic pressure produces
positive voltage at Pin 2.
An integral 80Hz high-pass UniSteep® filter provides easy switching
from a at frequency response to a low-end roll-off. The roll-off position
reduces the microphone’s sensitivity to popping in close vocal use. It also
reduces the pickup of low-frequency ambient noise (such as trafc, air-
handling systems, etc.), room reverberation and mechanically coupled
vibrations.
For maximum stability and minimum visibility, the headband should be
worn around the back of the head, with each cushioned support pad
resting on the temple in front of the ear. The cable should remain clipped
to the headband, with slack at the boom connection. The headset is
designed so the microphone descends from the left support pad.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 40°C for extended periods. Extremely high humidity
should also be avoided.
FORM No. ATGC-L0035-06-E
Machida Tokyo Japan
SPECIFICATIONS
ELEMENT Fixed-change back plate permanently
polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 40-15,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY
(Phantom / Battery)
-55 dB (1.7 mV) /
-56 dB (1.5 mV) re 1V at 1 Pa
IMPEDANCE (Phantom / Battery) 200 ohms / 270 ohms
MAXIMUM INPUT SOUND LEVEL
(Phantom / Battery)
146 dB / 132 dB SPL,
1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)
(Phantom / Battery)
111 dB / 97 dB,
1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 59 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
BATTERY TYPE 1.5V AA/UM3
BATTERY CURRENT/LIFE 0.4 mA / 1200 hours typical (alkaline)
SWITCHES Off, on-at, on-roll-off
WEIGHT MICROPHONE
POWER MODULE
31 g
139 g
DIMENSIONS HEADSET
MICROPHONE
POWER MODULE
165.0 mm - nominal at widest point,
67.0 mm - exible boom,
10.0 mm - diameter,
84.0(H) x 63.0(W) x 22.9(D) mm
OUTPUT CONNECTOR Integral 3-pin XLRM-type
CABLE 1.4 m long (permanently attached to
microphone), 2.6 mm diameter,
2-conductor shielded cable with TA3F-
type connector
ACCESSORIES FURNISHED AT8531 power module;
AT8128 windscreen;
AT8125l windscreen; battery
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
Roll-off


Specyfikacje produktu

Marka: Audio-Technica
Kategoria: Słuchawki
Model: ATM73a

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Audio-Technica ATM73a, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą