Instrukcja obsługi Behringer EQ700


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Behringer EQ700 (23 stron) w kategorii Konsola miksująca. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 3.8 gwiazdek

Strona 1/23
Thank you for showing your condence in us by purchasing the Behringer
GRAPHIC EQUALIZER EQ700. This high-quality stompbox is specically
designed to provide complete tone control and eliminate unwanted
feedback. It allows 7-band sound shaping and feedback elimination from
100 Hz to 6.4 kHz with a powerful 15 dB boost/cut per band.
1. Controls
(1) The 7-band EQ faders allow to boosting/cutting single
frequency ranges from
100 Hz to 6.4 kHz at ±15 dB.
(2) The LEVEL fader adjusts the output level. It can be used to
achieve eective volume “boost” or “cut.”
(3) This LED illuminates when the EQ is activated. It also serves as a
battery level indicator.
(4) Use the footswitch to activate/deactivate the EQ.
(5) Use this ¼" TS connector to plug in the instrument cable.IN
(6) The ¼" TS connector sends the signal to your amp.OUT
Use the connection at the front of the unit to plug in a 9 V power DC IN
supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery, press the hinges with a ballpen and
remove the pedal cover. Be careful not to scratch the unit.
The EQ700 has no on/o switch. As soon as you insert the
jack into the in connector, the EQ700 begins running.
When not using the EQ700, remove the jack from the
in connector. This extends the life of the battery.
The is located at the bottom.SERIAL NUMBER
V 1.0
GRAPHIC EQUALIZER EQ700
Ultimate 7-Band Graphic Equalizer
(2)
(6)
(1) (3)
(5)
(4)


Specyfikacje produktu

Marka: Behringer
Kategoria: Konsola miksująca
Model: EQ700

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Behringer EQ700, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą