Instrukcja obsługi Behringer Super Fuzz SF300

Behringer gitara Super Fuzz SF300

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Behringer Super Fuzz SF300 (23 stron) w kategorii gitara. Ta instrukcja była pomocna dla 54 osób i została oceniona przez 27.5 użytkowników na średnio 4.5 gwiazdek

Strona 1/23
SUPER FUZZ SF300
3-Mode Fuzz Distortion Eects Pedal
Thank you for showing your condence in us by purchasing
the Behringer SUPER FUZZ SF300. This eects pedal is ideally suited
for electric guitars and recreates the whole variety of famous fuzz tones
of the ‘60s and ‘70s.
1. Controls
(1) The LEVEL control adjusts the output level.
(2) The control allows you to boost/cut the TREBLE
high-frequency range.
(3) The BASS control allows you to boost/cut the low-frequency range.
(4) The GAIN control adjusts the gain for more distorted sounds.
(5) The switch lets you choose between 3 eect modes.MODE
FUZZ 1: Basic fuzz sound with emphasis on the midrange.
FUZZ 2: Full-bodied fuzz sound with scooped mids
and sharp harmonics.
BOOST: The Level control is inactive and the Gain control adjusts
the boost.
(6) The LED illuminates when the eect is activated. ON/BATT
It also serves as a battery level indicator.
(7) Use the footswitch to activate/deactivate the eect.
(8) Use this ¼" TS connector to plug in the instrument cable.IN
(9) The ¼" TS connector sends the signal to your amp.OUT
Use the connection to plug in a 9 V power supply (not included). DC IN
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery (not included), press the hinges with a
ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.
V 1.0
(1)
(3)
(9)
(5)
(6)
(8)
(7)
(2)
(4)


Specyfikacje produktu

Marka: Behringer
Kategoria: gitara
Model: Super Fuzz SF300

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Behringer Super Fuzz SF300, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą