Instrukcja obsługi Blaupunkt SRAC-S1

Blaupunkt system alarmowy SRAC-S1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blaupunkt SRAC-S1 (1 stron) w kategorii system alarmowy. Ta instrukcja była pomocna dla 30 osób i została oceniona przez 15.5 użytkowników na średnio 4.4 gwiazdek

Pobierz PDF

Strona 1/1

Wireless AC Powered Indoor Siren (SR S1)AC-

PPaarrttss DDeessccrriippttiioonn

1. LED Indicator / Function Button

Press once to transmit a test code.

Press and hold for 3 seconds to change audio indication beep

volume (High or Low).

Press and hold for 10 seconds to enter learning mode.

2. Plug

1. Plug the Siren into the power outlet. The Siren will emit 2

beeps

2. Put the Control Panel into learning mode.

3. Press and hold the Learn button for about 10 seconds and

release. The Siren will transmit a learn signal and emit a beep;

the LED will also begin to flash.

4. Refer to Control Panel manual to complete learning process.

5. If learning is successful, the LED will flash twice then turn off;

the Siren will emit two beeps to confirm.

6. If learning is unsuccessful, press the learn button once to stop

LED flashing and restart from Step 3.

1. Plug the Siren into power socket to supply power

2. Put your Control Panel into Walk Test mode

3. Press the Function button on the Siren once to transmit a test

code.

4. If the Control Panel receives the test code, it will respond

accordingly to indicate the Siren can function properly at

chosen location

If the Co ntrol Panel fails to receive the test code, it means the

Siren is outside Control Panel signal range, relocate the Siren

until the Control Panel could receive the signal properly.

The 95Siren produces a minimum of dBA sound pressure at 1

meter range when activated.

For Burglar and Panic Alarm, the Siren gives a continuous alarm

sound.

For Fire / Water alarm, the Siren gives an intermittent alarm

sound of 2 sec siren followed by a 1 sec interval. -

The Siren is silenced when either the programmed Control Panel

alarm length expires or when the is disarmed to Control anel P

turn off the S iren.

Audio Status Indication Table

The Siren will sound indication beeps according to different status,

please refer to table below.

Arm/Home 1 beep*

Disarm 2 beeps*

Previous alarm

warning 3- second alarm

Entry/Exit Sound Count-down beeps

* Siren Audio indication will be effected by the Confirmation

ON / OFF setting in your Control Panel settings.

The Siren has a built in backup battery which will be activated -

when the Siren is disconnected from AC power. The battery will

be charged automatically when the Siren is plugged into a power

socket.

When the Siren is unplugged from the power socket, it will

transmit an AC failure signal to the Control Panel to notify the

situation.

- -10°C to 40°C, relative humidity 85% non condensing.

868 MHz

OOppeerraattiioonn

Specyfikacje produktu

Marka:	Blaupunkt
Kategoria:	system alarmowy
Model:	SRAC-S1
Kolor produktu:	Biały
Napięcie wejściowe AC:	230 V
Poziom ciśnienia akustycznego:	95 dB
Technologia baterii:	Alkaliczny
Zakres temperatur (eksploatacja):	-10 - 45 °C
Rodzaj baterii:	D
Diody LED:	Status
Model:	Syrena bezprzewodowa
Liczba baterii:	4
Wymiary produktu (SxGxW):	83 x 63 x 95 mm
Możliwe umieszczenie:	Wewnętrzna
Czas eksploatacji baterii:	2.5 lat(a)
Częstotliwość (MHz):	868 MHz
Liczba dźwięków alarmowych:	3