Instrukcja obsługi Bose Panaray 402
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bose Panaray 402 (16 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 3 użytkowników na średnio 3.5 gwiazdek
Strona 1/16
1
Bose® Panaray® 402® Series II Loudspeaker
Installation Guide*
Installationsvejledning*
Installationsanleitung*
Guía de instalación*
Guide d’installation*
Guida all’installazione*
Installatiehandleiding*
Installationsanvisning*
*For use by trained installers only
*Kun til brug for erfarne installatører
*Montage ausschließlich durch
ausgebildetes Installationspersonal
*Para uso exclusivo de instaladores capacitados
*Réservé aux installateurs ayant suivi une formation
*Solo per l’uso da parte di installatori professionisti
*Uitsluitend voor gebruik door ervaren installateurs
*Ska endast användas av utbildade installatörer
2
DECLARATION OF CONFORMITY
We, the offerer:
Bose® Corporation, The Mountain, Framingham, MA 01701-9168 USA
acknowledge our sole responsibility, that the product:
Kind of equipment: Loudspeaker
Type designation: 402
® Series II loudspeaker
In accordance with EMC Directive 89/336/EEC and Article 10(1) of the Directive,
is in compliance with the following norm(s) or document(s):
Technical regulations: EN50081-1, EN50082-1
Accredited by:
Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA
January 2, 2001
Bose Products B.V. Nic Merks
Nijverheidstraat 8, 1135 GE Edam Vice President, Europe
The Netherlands Manufacturer’s authorized EU representative
3
English
For Permanent Installation
WARNING:
Permanent installations involve the attachment of the loudspeakers to brackets or other mounting surfaces
for long-term or seasonal use. Such mountings, frequently in overhead locations, involve risk of personal injury if either the
mounting system or the loudspeaker attachment fails.
Bose
®
offers permanent mounting brackets for the safe use of these loudspeakers in such
installations. However, we realize some installations may call for use of other, custom-
designed mounting solutions or non-Bose mounting products. While Bose Corporation
cannot be held responsible for the proper design and use of non-Bose mounting systems,
we offer the following guidelines for the permanent installation of any Bose 402 loudspeaker:
• Obtain your mounting system from a reputable manufacturer, and make sure the system
is specifically designed for the loudspeaker of choice and your intended use.
• Before using a custom-designed and fabricated mounting system, have a licensed
professional engineer review the design and fabrication for structural integrity and safety
in the intended application.
• Notice that all threaded attachment points on the bottom and rear of each loudspeaker
cabinet have a metric M8 x 1.25 thread with at least 10 usable threads.
•Use a safety cable, separately attached to the cabinet at a point not in common with
the load bearing attachment points of the bracket to the loudspeaker.
• If you are unfamiliar with the proper design, use, and purpose of a safety cable, consult a
licensed professional engineer, a rigging professional, or a theatrical lighting trades
professional.
CAUTION:
Use only graded hardware. Fasteners should be metric Grade 8.8 minimum and should be tightened
using torque not to exceed 50 inch-pounds (5.6 Newton-meters). Overtightening the fastener could result in irreparable
damage to the cabinet and an unsafe assembly.
Do not re-tighten these fasteners unless they are visibly loose. Characteristics of the plastic cabinet may cause some
relaxation of tightening torque over time, which is normal. Lockwashers or a thread locking compound intended for hand
disassembly (such as Loctite
®
242) should be used for a vibration resistant assembly.
CAUTION:
The fastener should be long enough to engage no fewer than 8 and no more than 12 threads of the
attachment point. A fastener should protrude by 10 to 15 mm, with 12 mm preferred (
3
/
8
to
5
/
8
inch, with
1
/
2
inch preferred)
beyond the assembled mounting parts to provide sufficient threaded attachment to the loudspeaker. Using a fastener that is
too long may result in irreparable damage to the cabinet and, when overtightened, can create a potentially unsafe assembly.
Using a fastener that is too short provides inadequate holding power and may strip the mounting threads, resulting in an
unsafe assembly. Confirm that at least 8 full threads are engaged in your assembly.
CAUTION:
Do not attempt to alter the threaded attachment points. While SAE
5
/
16
-18 UNC fasteners are very
similar in appearance to the metric M8, they are not interchangeable. Do not attempt to re-thread the attachment points to
accommodate any other thread size or type. Doing this will render the installation unsafe and will permanently damage the
loudspeaker. You may substitute
5
/
16
-inch washers and lockwashers for the 8 mm ones.
Installation of 402® Loudspeakers..................continues on p11
Specyfikacje produktu
| Marka: | Bose |
| Kategoria: | głośnik |
| Model: | Panaray 402 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Bose Panaray 402, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje głośnik Bose
25 Stycznia 2025
28 Grudnia 2024
28 Grudnia 2024
18 Grudnia 2024
9 Grudnia 2024
7 Października 2024
6 Października 2024
26 Września 2024
25 Września 2024
24 Września 2024
Instrukcje głośnik
- głośnik Sharper Image
- głośnik Razer
- głośnik Ferguson
- głośnik Numan
- głośnik Prixton
- głośnik Sonoro
- głośnik Aiaiai
- głośnik Monster
- głośnik Mtx Audio
- głośnik KLH Audio
- głośnik Eve Audio
- głośnik Quad
- głośnik Element
- głośnik Kenwood
- głośnik Blackmore
Najnowsze instrukcje dla głośnik
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025