Instrukcja obsługi Boss CUBE Street II
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Boss CUBE Street II (12 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
Owner’s Manual
Battery-Powered Stereo Amplier
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY” and Owner’s Manual (p. ). After reading, keep the 12
document(s) where it will be available for immediate reference.
© 2021 Roland Corporation
2
Panel Descriptions
MIC/INSTRUMENT Channel
1 EQUALIZER
[BASS] knob
Adjusts the sound level of the low-frequency range.
[MIDDLE] knob
Adjusts the sound level of the middle-frequency range.
[TREBLE] knob
Adjusts the sound level of the high-frequency range.
2 [REVERB] knob
Adjusts the reverb depth.
3 [SELECT] switch
Switches to the input level that’s appropriate for the device you’ve
connected.
Use the “MIC” setting if you’re connecting a mic, or use the “INST”
setting if you’re connecting an acoustic guitar or a keyboard.
4 [VOLUME] knob
Adjusts the volume of the MIC/INSTRUMENT channel.
5 HARMONY
This adds natural harmonies to the audio that is input from the MIC/
INSTRUMENT jack.
[HARMONY] knob
Use this to turn the harmony on/o, switch between harmony types
and adjust the volume. The setting changes depending on the
position of the knob.
Type Explanation
UNISON Creates an eect that sounds like someone else singing the
same melody together.
HIGH Adds harmony notes based on upper fourths and thirds. *1
HIGHER Adds harmony notes based on sixths and fths. *1
*1 Other pitches may be added under certain conditions.
[KEY] button
This sets the key for the harmony (p. 6).
GUITAR/MIC Channel
6 [TUNER] button
Press to tune your guitar (p. 6).
7 EQUALIZER
[BASS] knob
Adjusts the sound level of the low-frequency range.
[MIDDLE] knob
Adjusts the sound level of the middle-frequency range.
[TREBLE] knob
Adjusts the sound level of the high-frequency range.
8 [CHORUS/DELAY] knob
This knob switches between chorus or delay, depending on the
position.
Type Explanation
CHORUS Chorus is an eect that creates a beautiful spaciousness
and depth by adding a slightly modulated sound.
DELAY Changes the delay time and eect.
9 [REVERB] knob
Adjusts the reverb depth.
1 9 13 147 82
3 4 6 10 11 12 15
516
Top Panel
3
Panel Descriptions
10 [AMP TYPE] knob
Selects the amp type. All provided amp types are original.
[AMP TYPE] knob
This knob switches between amp type variations.
Type Explanation
A-GUITAR
Use this type when connecting an acoustic guitar.
This adjusts the resonance of the acoustic guitar body.
NORMAL A direct sound that doesn’t adjust the
resonance.
BRIGHT A brilliant sound extending to the
high range.
WIDE A full sound with emphasized body
resonance.
INSTRUMENT Select this when connecting a musical instrument.
E-GUITAR
Select this when connecting an electric guitar.
CLEAN
This is an original amp that provides a
clean and natural sound with a sense
of transparency. Use this together with
the chorus and reverb of this unit for a
spacious, three-dimensional sound.
CRUNCH
This original amp delivers a fat crunch
sound, with each note sounding
clearly.
LEAD This is a high-gain original amp that
produces thick-sounding distortion.
ACOUSTIC SIM
This is an original amp that transforms
the sound of a connected electric
guitar into the sound of an acoustic
guitar.
MIC Select this if you’ve connected a microphone.
11 [GAIN] knob
Adjusts the gain (amount of distortion).
12 [VOLUME] knob
Adjusts the volume of the GUITAR/MIC channel.
Common to Both Channels
13 [i-CUBE LINK/AUX IN] knob
Adjusts the audio volume from the i-CUBE LINK/AUX IN jack, USB
port (USB IN) and .Bluetooth®
* Note that the CUBE STREET II does not oer Bluetooth functionality.
You’ll need to attach the BT-DUAL (sold separately) to use Bluetooth
(p. 8).
14 [OUTPUT POWER] switch
Changing the setting of this switch changes the maximum volume
of the internal speaker and the available operating time on
batteries.
Setting Explanation
MAX The maximum volume is louder, but the available
operating time is shorter.
ECO The maximum volume is reduced, but the available
operating time is longer.
15 LOOPER
You can record up to 90 seconds (in mono) and play back the
recorded section over and over. You can also layer additional
performances with the recording as it plays back (overdubbing).
This lets you play along with your own backing tracks on the y
(p. 7).
* The factory default setting is set to a maximum of 45 seconds
(stereo). With the dedicated mobile device app, you can select up
to a maximum of 90 seconds (mono). For details, refer to “Wireless
Connection with a Mobile Device” (p. 8).
[LOOPER] button
Switches between recording, loop playback, and overdubbing.
[STOP] button
Stops recording or playback.
REC/PLAY/DUB indicator
Indicates the status of the looper.
16 [POWER] switch
Turns the power of this unit on/o.
Specyfikacje produktu
| Marka: | Boss |
| Kategoria: | odbiornik |
| Model: | CUBE Street II |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Boss CUBE Street II, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje odbiornik Boss
12 Stycznia 2025
11 Stycznia 2025
15 Grudnia 2024
15 Grudnia 2024
15 Grudnia 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
5 Października 2024
Instrukcje odbiornik
- odbiornik Palsonic
- odbiornik Primare
- odbiornik Martin Logan
- odbiornik Trust
- odbiornik Leema
- odbiornik Planet Audio
- odbiornik Cloud
- odbiornik Atoll
- odbiornik LEA
- odbiornik Klipsch
- odbiornik Sandberg
- odbiornik Matrox
- odbiornik Taga Harmony
- odbiornik Genie
- odbiornik ANKARO
Najnowsze instrukcje dla odbiornik
9 Kwietnia 2025
9 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
30 Marca 2025