Instrukcja obsługi Casio SGW-500H-1BVER

Casio zegarek SGW-500H-1BVER

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Casio SGW-500H-1BVER (9 stron) w kategorii zegarek. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.4 gwiazdek

Pobierz PDF

Strona 1/9

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

Warning!

•

The measurement functions built into this watch are not intended for taking

measurements that require professional or industrial precision. Values produced

by this watch should be considered as reasonable representations only.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any

damage or loss suffered by you or any third party arising through the use of

this product or its malfunction.

E-2

• To ensure correct direction readings by this watch, be sure to perform

bidirectional calibration before using it. The watch may produce incorrect

direction readings if you do not perform bidirectional calibration. For more

information, see “To perform bidirectional calibration” (page E-36).

• Keep the watch away from audio speakers, magnetic necklace, cell phone,

and other devices that generate strong magnetism. Exposure to strong

magnetism can magnetize the watch and cause incorrect direction readings. If

incorrect readings continue even after you perform bidirectional calibration, it

could mean that your watch has been magnetized. If this happens, contact

your original retailer or an authorized CASIO Service Center.

E-3

About This Manual

• Depending on the model of your watch, digital display

text appears either as dark ﬁ gures on a light

background, or light ﬁ gures on a dark background. All

sample displays in this manual are shown using dark

ﬁ gures on a light background.

• Button operations are indicated using the letters shown

in the illustration.

• Note that the product illustrations in this manual are

intended for reference only, and so the actual product

may appear somewhat different than depicted by an

illustration.

E-4

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “Conﬁ guring Home City Settings” (page E-17) to conﬁ gure

your Home City and daylight saving time settings.

Important!

Proper World Time Mode, Sunrise/Sunset Mode, and Moon Age Mode data depend

on correct Home City, time, and date settings in the Timekeeping Mode. Make sure

you conﬁ gure these settings correctly.

2. Conﬁ gure latitude and longitude settings for your current location.

See “To select a Home City by conﬁ guring latitude and longitude settings” (page

E-20).

E-5

3. Set the current time.

See “Conﬁ guring Current Time and Date Settings” (page E-22).

The watch is now ready for use.

E-6

Contents

E-3 About This Manual

E-4 Things to check before using the watch

E-11 Mode Reference Guide

E-16 Timekeeping

E-17 Conﬁ guring Home City Settings

E-17 To conﬁ gure Home City settings

E-19 To change the Daylight Saving Time (summer time) setting

E-20 Conﬁ guring Latitude and Longitude Settings for Your Current Location

E-20 To select a Home City by conﬁ guring latitude and longitude settings

E-22 Conﬁ guring Current Time and Date Settings

E-22 To change the current time and date settings

E-7

E-26 Hand Home Position Adjustment

E-26 To adjust home positions

E-29 Taking Direction Readings

E-30 To take a direction reading

E-36 To perform bidirectional calibration

E-38 To perform magnetic declination correction

E-43 Thermometer

E-43 To enter and exit the Thermometer Mode

E-45 To correct the temperature value

E-47 Specifying Temperature Unit

E-47 To specify the temperature unit

E-49 Looking up Sunrise and Sunset Times

E-49 To look up the sunrise and sunset times on a speciﬁ c date

E-50 To toggle between sunrise time and sunset time

E-51 To view the sunrise/sunset time for a particular date

E-8

E-52 Using Moon Data

E-52 To look up the Moon age on a speciﬁ c date

E-54 Using the Alarm

E-54 To enter the Alarm Mode

E-55 To set an alarm time

E-56 To test the alarm

E-57 To turn an alarm and the Hourly Time Signal on and off

E-57 To stop the alarm

E-58 Using the Stopwatch

E-58 To enter the Stopwatch Mode

E-58 To perform an elapsed time operation

E-58 To pause at a split time

E-9

E-60 Using the Countdown Timer

E-60 To enter the Countdown Timer Mode

E-60 To specify the countdown start time

E-61 To perform a countdown timer operation

E-62 To stop the alarm

E-63 Checking the Current Time in a Different Time Zone

E-63 To enter the World Time Mode

E-64 To view the time in another time zone

E-64 To specify standard time or daylight saving time (DST) for a city

E-65 Illumination

E-65 To turn on illumination

E-66 To change the illumination duration

E-68 Button Operation Tone

E-68 To turn the button operation tone on and off

Operation Guide 5269

Specyfikacje produktu

Marka:	Casio
Kategoria:	zegarek
Model:	SGW-500H-1BVER
Materiał obudowy:	Żywica
Wysokość produktu:	49.6 mm
Szerokość produktu:	46.8 mm
Głębokość produktu:	13.6 mm
Waga produktu:	51 g
Elektryczny kompas:	Tak
Rodzaj baterii:	SR927W
Liczba baterii:	2
Wodoodporny:	Tak
Chronograf:	Nie
Funkcja alarmu:	Tak
Kalendarz:	Tak
Dokładność:	30 s/mies.
Typ zegarka:	Zegarek z bransoletką
Kolor obudowy:	Czarny
Tworzywo paska:	Żywica
Kolor główny paska:	Czarny
Kształt koperty:	Okrągły
Kolor tarczy zegarka:	Czarny
Styl oznaczenia godzin i minut:	Bez liczb
Czas eksploatacji baterii:	2 lat(a)
Termometr:	Tak
Podświetlenie LED:	Tak
Tryb zegarka:	12 h/24 h
Głębokość wodoszczelności:	100 m
Typ szkła:	Mineralny
Dedykowana płeć:	Męski
Funkcja world time:	Tak
Typ kalendarza:	Data
Wodoszczelność:	10 ATM