Instrukcja obsługi Casio Wave Ceptor WV200DA-1A
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Casio Wave Ceptor WV200DA-1A (5 stron) w kategorii Oglądać. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.8 gwiazdek
Strona 1/5
Operation Guide 3140
1
MA08 -EA10
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
•
This watch does not have a time zone that corresponds to the UTC offset of
–3.5 hours. Because of this, the radio-controlled timekeeping and World Time
functions will not display the correct time for Newfoundland, Canada.
Caution!
Your watch is shipped with its Auto Display feature (which continually changes the
contents of the digital display) turned on. Calibration signal reception is disabled while
Auto Display is turned on.
Press any button to turn off Auto Display and return to the Timekeeping Mode.
About This Manual
•
Button operations are indicated using the letters shown
in the illustration.
•
Each section of this manual provides you with the
information you need in order to perform operations in
each mode. Further details and technical information
can be found in the “Reference” section.
General Guide
•
Press
C
to change from mode to mode.
•
In any mode (except when a setting screen is on the display), press
B
to illuminate
the display.
Timekeeping Mode World Time Mode Countdown
Timer Mode
Alarm ModeStopwatch Mode
Press .
Radio-controlled Atomic Timekeeping
This watch receives a time calibration signal and updates
its time setting accordingly.
•
Supported time calibration signals: United States (Fort
Collins), England (Anthorn).
•
See the information under “Signal Reception
Troubleshooting” if you experience problems with time
calibration signal reception.
Current Time Setting
This watch adjusts its time setting automatically in
accordance with a time calibration signal. You can also
perform a manual procedure to set the time and date,
when necessary.
•
The fi rst thing you should do after purchasing this
watch is to specify your Home City (the city where you
normally will use the watch). For more information,
see “To specify your Home City” .
•
When using the watch outside the areas covered by the time signal transmitters, you
will have to adjust the current time setting manually as required. See Timekeeping “ ”
for more information about manual time settings.
•
The U.S. time calibration signal can be picked up by the watch while in North
America. The term North America in this manual refers to the area that consists of “ ”
Canada, the continental United States, and Mexico.
To specify your Home City
1. In the Timekeeping Mode, hold down
A
until the city
code starts to fl ash, which indicates the setting screen.
2. Press
D
(east) and
B
(west) to select the city code you
want to use as your Home City.
•
Time calibration signal reception is supported when
any one of the city codes shown in the table below is
selected as your Home City.
U.S. Signal U.K. Signal
City
Code
City
Name
City
Code
City
Name
City
Code
City
Name
City
Code
City
Name
HNL Honolulu YWG Winnipeg LIS Lisbon ATH Athens
ANC LON MOWAnchorage ChicagoCHI London Moscow
YVR Vancouver MIA Miami MAD Madrid
LAX YTOLos Angeles Toronto PAR Paris
YEA ROMEdmonton NYC New York Rome
DEN Denver YHZ Halifax BER Berlin
MEX STOMexico City YYT St. Johns Stockholm
3. Press
A
twice to exit the setting screen.
Day of week
Year
Home Time
(Hour : Minutes Seconds)
Month – Day
PM indicator DST
indicator
Important!
•
Normally, your watch should show the correct time as soon as you select your Home
City code. If it does not, it should adjust automatically after the next auto receive
operation (in the middle of the night). You can also perform manual receive or you
can set the time manually.
•
The watch will receive the time calibration signal automatically from the applicable
transmitter (in the middle of the night) and update its settings accordingly. For
information about the relationship between city codes and transmitters, see Home “
City Codes and Transmitters . ”
•
Under factory default settings, auto receive is turned off for all of the following city
codes: HNL (Honolulu), ANC (Anchorage), ATH (Athens), and MOW (Moscow). For
details about turning on auto receive for these city codes, see To turn auto receive “
on and off . ”
•
You can disable time signal reception, if you want. See To turn auto receive on and “
off for more information. ”
•
See the maps under for information about the “Approximate Reception Ranges”
reception ranges of the watch.
•
If you are in an area that does not use Daylight Saving Time (summertime), turn off
the DST setting.
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
•
Auto Receive
With auto receive, the watch receives the time calibration signal automatically up to
six times a day. When any auto receive is successful, the remaining auto receive
operations are not performed. For more information, see About Auto Receive“ ”.
•
Manual Receive
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see To perform manual receive . “ ”
City code
Specyfikacje produktu
| Marka: | Casio |
| Kategoria: | Oglądać |
| Model: | Wave Ceptor WV200DA-1A |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Casio Wave Ceptor WV200DA-1A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Oglądać Casio
30 Marca 2025
19 Stycznia 2025
5 Stycznia 2025
21 Grudnia 2024
21 Grudnia 2024
21 Grudnia 2024
21 Grudnia 2024
21 Grudnia 2024
21 Grudnia 2024
21 Grudnia 2024
Instrukcje Oglądać
- Audemars Piguet
- Balmain
- Pyle
- Krontaler
- Armani
- Beper
- Shinola
- La Crosse
- Renkforce
- Inter-Quartz
- Leff
- Bulova
- Fromanteel
- Rodania
- Obaku
Najnowsze instrukcje dla Oglądać
26 Marca 2025
26 Marca 2025
13 Marca 2025
13 Marca 2025
13 Marca 2025
13 Marca 2025
13 Marca 2025