Instrukcja obsługi Chief HB74P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief HB74P (2 stron) w kategorii Akcesoria do projektora. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 9 użytkowników na średnio 4.7 gwiazdek

INSTALLATION INSTRUCTIONS

Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone

makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation

or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, ex-

pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this

document.

© 2008 Chief Manufacturing, 8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8803-000114

5/28/08

MODEL: HB-74P Custom Projector Bracket

Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative by calling

1-800-582-6480.

PARTS

Figure 1:

INSTALLATION

WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must be securely fastened

to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.

1.Place four nylon spacers on top of projector.

2.Lower custom HB bracket onto spacers on top of projector. Ensure that the side hooks open towards back of the projector. (See Figure 1)

3.Attach HB bracket to projector using four M6 x 16mm Phillips flat head screws through nylon spacers. (See Figure 1)

Continued...

(1) BRACKET, Custom HB(4) NUT, Flange, Hex, 5/16-18

(4) SCREW, Phillips Flat Head, M6 x 16mm(4) SPACER, Nylon .50 x .260 x .1875

x 4

x

x 4

x

1

2

Toward front

of projector

Specyfikacje produktu