Instrukcja obsługi Draper Onyx
Draper
Ekran projekcyjny
Onyx
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Draper Onyx (3 stron) w kategorii Ekran projekcyjny. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 12 użytkowników na średnio 4.8 gwiazdek
Strona 1/3
Assembly/Mounting Instructions
Onyx Permanently Tensioned Projection Screen by Draper
Caution
1 Read instructions through completely before proceeding.
2 Follow instructions carefully. Installation contrary to instructions
invalidates warranty.
3 Screen should be accessible for complete removal should fabric
become damaged or should other service be required.
4 Screen should be installed level (using a carpenter’s level).
5 Nothing should be fastened to screen frame or viewing surface.
6 Make sure you have received all parts (see parts list below and
exploded diagram on page 2).
7 Tools Required:
1
/
8
" Allen wrench (included); #2 Phillips screwdriver.
Optional tools: Flat blade screwdriver or small putty knife.
8 Installer is responsible for providing appropriate hardware for mounting.
9 When lifting assembled screen, do not lift at only one corner; lift at
both corners. Lifting by one corner could result in damage to the
screen frame, especially on large screens.
The ideal temperature range for assembling folding screens to prevent
damaging the surface is 68°-78° F (20°-26° C). Assembling below
recommended temperatures may damage surface and void warranty.
NOTE: Screen has been thoroughly inspected and tested at factory and
found to be operating properly prior to shipment.
Copyright © 2014 Draper Inc. Form Onyx_Inst14-R Printed in U.S.A.
®
If you encounter any difficulties installing or servicing your Onyx screen, call your
dealer or Draper, Inc., Spiceland, Indiana, (765) 987-7999 or fax (765) 987-7142.
Onyx—Hardware and Parts List
Frame Preparation
1 Clean area and place frame assembly pieces face down. Insert corner
brackets into aluminum frame extrusions as indicated in Figures 1 through
4. For easier assembly insert the inner connectors first.
Figure 1
2 Make sure corner brackets are fully seated (see Fig. 5).
Figure 3
Frame Extrusions - 4
Wall-Bra ets - 2 Viewing Surface - 1ck
Plastic Tubing - 4
Surface Retention Extrusions
Typically 4, ries with va
some veiwing surfaces
Front
Back
1/ " Allen Wrench - 18
Corner Brackets - 8
Figure 4
Figure 7
Figure 5
(Continued on Page 2)
Patented by Draper, Inc., U.S. Patent Nos. 6,785,047; 7,113,332; and 7,369,310.
Caution: When lifting assembled screen, do not lift at only one corner; lift
at both corners. Lifting by one corner could result in damage to the screen
frame, especially on large screens.
Figure 2
3 Secure corner brackets by tightening setscrews (see Fig. 6).
Figure 6
4 Repeat steps 1-3 for the remaining corners (see Fig. 7).
The Onyx has a precision cut mitered corner.
Please Note: If corner gaps exist (painted frame only) readjusting the frame
and/or applying a small bead of black silicone to fill the gap is the best solu-
tion. Apply a very small bead of black silicone to area where frame gap exists.
Work silicone into gap (using your finger or a cloth). Remove ALL silicone on
face of frame; only silicone inside gap should remain.
Please Note: If corner brackets do not slide into frame extrusions, make sure
that setscrews are backed out enough to allow proper clearance.
Specyfikacje produktu
| Marka: | Draper |
| Kategoria: | Ekran projekcyjny |
| Model: | Onyx |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Draper Onyx, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Ekran projekcyjny Draper
10 Września 2024
6 Września 2024
4 Września 2024
2 Września 2024
2 Września 2024
1 Września 2024
31 Sierpnia 2024
31 Sierpnia 2024
29 Sierpnia 2024
29 Sierpnia 2024
Instrukcje Ekran projekcyjny
- Luxburg
- Elite ProAV
- Elite Screens
- NEC
- Projecta
- EPV
- EluneVision
- Pyle
- Stewart
- Duronic
- Lumene
- Elite
- Vestel
- Avers
- GPX
Najnowsze instrukcje dla Ekran projekcyjny
3 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
28 Stycznia 2025
11 Października 2024
8 Października 2024
8 Października 2024
7 Października 2024
6 Października 2024