Instrukcja obsługi Dual XNP553
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dual XNP553 (8 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.4 gwiazdek
Strona 1/8
INSTALLATION/OWNER'S MANUAL
XNP693
XNP653
XNP553
SBX693
SBX653
SBX553
Car Audio Speakers
XNP-SBX SERIES
2
XNP - SBX SERIES PREPARATION
Getting Started
Safety
This symbol with “CAUTION” is intended to alert the user
to the presence of important instructions. Failure to heed
the instructions can result in injury or unit damage.
To prevent injury and damage to the unit, please read
and follow the instructions in this manual.
If you feel unsure about installing this system yourself,
have it installed by a qualified audio technician.
Before installation, disconnect the battery negative
(-) terminal to prevent damage to the unit, fire and/or
possible injury.
Do not connect Amplifier or any audio source to
illumination inputs. Inputs are designed for 12 volt
power source only. More then 3Vrms connected to
illumination inputs may cause permanent damage to
the lighting elements.
Thanks for choosing Dual. This manual is designed to provide information for
the purchaser of Dual car audio products. Dual has attempted to make sure
all the information in this manual is current. But, this information is subject to
change without notice.
3
XNP - SBX SERIES INSTALLATION
Installation
Please Note: Some Full Range Speakers are most often used as direct
replacements for stock speakers and are shipped without grilles or grilles
may not be required. Parts of the following instructions may not apply to your
installation.
The installation instructions included here are basic. If you feel
unsure about installing the speaker system, Dual recommends
that you seek installation by a qualified auto
sound technician.
Before installation, please follow these rules:
1. Be sure to carefully read and understand the instructions before
attempting to install the product.
2. For safety, disconnect the negative lead from the battery prior to beginning
the installation.
3. For easier assembly, we recommend that if additional wiring is required,
that you run all wires prior to mounting your speaker in place.
4. Use the highest quality connectors for a reliable installation and to
minimize signal or power loss.
5. Use caution before you drill or cut! Be careful not to cut or drill into gas
tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical
wiring when working on any vehicle.
6. Never run speaker wires underneath your vehicle. Running speaker wires
inside the vehicle provides the best protection from exhaust heat and
environmental elements.
7. Avoid running wires over, near, or through sharp edged surfaces. We
suggest you also use rubber grommets to protect any wires routed
through metal, especially the firewall.
8. Do not connect audio outputs from your amp or receiver to the Illuminite
inputs of the speakers. This WILL DAMAGE the LED bulbs and WILL void
your warranty.
Specyfikacje produktu
| Marka: | Dual |
| Kategoria: | głośnik |
| Model: | XNP553 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Dual XNP553, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje głośnik Dual
31 Stycznia 2025
30 Stycznia 2025
30 Stycznia 2025
30 Stycznia 2025
30 Stycznia 2025
30 Stycznia 2025
30 Stycznia 2025
30 Stycznia 2025
30 Stycznia 2025
30 Stycznia 2025
Instrukcje głośnik
- głośnik Atomos
- głośnik Mount-It!
- głośnik VOX
- głośnik Craftsman
- głośnik BZBGear
- głośnik Paulmann
- głośnik Fenton
- głośnik Lenmar
- głośnik Extron
- głośnik Artsound
- głośnik Malone
- głośnik Logic3
- głośnik Telefunken
- głośnik Ministry Of Sound
- głośnik Blackmagic Design
Najnowsze instrukcje dla głośnik
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025