Instrukcja obsługi Dual XRM46BT


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dual XRM46BT (18 stron) w kategorii Radia samochodowe. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 3.8 gwiazdek

Strona 1/18
INSTALLATION/OWNER'S MANUAL
AM/FM Receiver with Bluetooth
XRM46BT
2
XRM46BT INSTALLATION
TYPICAL FRONT-LOAD 
DIN MOUNTING METHOD
KEYS
HEAD
UNIT
MOUNTING
SLEEVE
INSTALLATION
MOUNTING KIT
OR DASHBOARD
Preparation
Please read entire manual before installation.
Before You Start
Disconnect negative battery terminal. Consult a qualified technician for instructions.
Avoid installing the unit where it would be subject to high temperatures, such as from
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Getting Started
Remove trim ring from unit.
Remove 2 transit screws located on top of the unit.
Insert the supplied keys into the slots as shown, and slide the unit out of the mounting
sleeve.
Install mounting sleeve into opening, bending tabs to secure.
Connect wiring harness and antenna. Consult a qualified technician if you are unsure.
Certain vehicles may require an installation kit and/or wiring
harness adapter (sold separately).
Test for correct operation and slide into mounting sleeve to secure.
Snap trim ring into place.
3
XRM46BT INSTALLATION
Wiring Diagram
FUSE
When replacing the fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse could
damage the radio.
The unit uses one
10 amp AGC fuse located
in-line.
Antenna
Connector
10 AMP
AGC Fuse


Specyfikacje produktu

Marka: Dual
Kategoria: Radia samochodowe
Model: XRM46BT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dual XRM46BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą