Instrukcja obsługi Dürkopp Adler 827-M
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dürkopp Adler 827-M (122 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 4.3 gwiazdek
Strona 1/122
827/827-M
Service Instructions
All rights reserved.
Property of Dürkopp Adler AG and protected by copyright. Any reuse of these contents,
including extracts, is prohibited without the prior written approval of Dürkopp Adler AG.
Copyright © Dürkopp Adler AG 2019
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Table of Contents
Service Instructions 827/827-M - 01.0 - 05/2019 1
1 About these instructions ........................................................... 5
1.1 For whom are these instructions intended?.................................. 5
1.2 Representation conventions – symbols and characters ............... 5
1.3 Other documents .......................................................................... 7
1.4 Liability.......................................................................................... 7
2 Safety........................................................................................... 9
2.1 Basic safety instructions ............................................................... 9
2.2 Signal words and symbols used in warnings.............................. 10
3 Working basis ........................................................................... 13
3.1 Order of the adjustments ............................................................ 13
3.2 Laying the cables........................................................................ 13
3.3 Removing the covers.................................................................. 14
3.3.1 Access to the underside of the machine..................................... 14
3.3.2 Disassembling and assembling the arm cover ........................... 15
3.3.3 Disassembling and assembling the head cover ......................... 16
3.3.4 Disassembling and assembling the valve cover......................... 17
3.3.5 Opening and closing the throat plate slide ................................. 18
3.3.6 Disassembling and assembling the throat plate ......................... 19
3.3.7 Disassembling and assembling the feed dog ............................. 20
3.4 Flats on shafts ............................................................................ 21
3.5 Locking the machine in place ..................................................... 22
3.6 Adjusting the handwheel into position ........................................ 23
4 Adjusting the handwheel scale ............................................... 25
5 Positioning the arm shaft......................................................... 26
6 Positioning the toothed belt wheels ....................................... 27
6.1 Positioning the upper toothed belt wheel.................................... 27
6.2 Positioning the lower toothed belt wheel .................................... 28
7 Stitch length adjusting wheel.................................................. 30
7.1 Adjusting the stitch length adjusting wheel................................. 30
7.2 Adjusting the stitch length limit ................................................... 32
7.3 Adjusting the eccentric for the forward and backward stitches... 33
8 Needle bar linkage.................................................................... 35
8.1 Aligning the needle bar linkage sideways................................... 35
8.2 Aligning the needle bar linkage in the sewing direction.............. 37
9 Adjusting the feed dog............................................................. 38
9.1 Adjusting the feed dog position .................................................. 38
9.1.1 Moving the feed dog on the feed dog carrier.............................. 38
9.1.2 Moving the feed dog carrier........................................................ 39
9.2 Adjusting the feed dog movement .............................................. 40
9.2.1 Adjusting the feed movement ..................................................... 40
9.2.2 Adjusting the feed dog height at top dead center ....................... 41
9.2.3 Adjusting the stroke movement .................................................. 42
9.2.4 Adjusting the compensating weight ............................................ 43
Specyfikacje produktu
| Marka: | Dürkopp Adler |
| Kategoria: | maszyna do szycia |
| Model: | 827-M |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Dürkopp Adler 827-M, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna do szycia Dürkopp Adler
4 Marca 2025
13 Października 2024
11 Października 2024
6 Października 2024
29 Września 2024
28 Września 2024
25 Września 2024
23 Września 2024
22 Września 2024
20 Września 2024
Instrukcje maszyna do szycia
- maszyna do szycia SteamMax
- maszyna do szycia Sinbo
- maszyna do szycia Minerva
- maszyna do szycia Janome
- maszyna do szycia Lifetec
- maszyna do szycia Medion
- maszyna do szycia Müller
- maszyna do szycia Easy Home
- maszyna do szycia Termozeta
- maszyna do szycia Lewenstein
- maszyna do szycia Yamata
- maszyna do szycia Micromaxx
- maszyna do szycia ER
- maszyna do szycia Brother
- maszyna do szycia Hema
Najnowsze instrukcje dla maszyna do szycia
8 Kwietnia 2025
5 Marca 2025
1 Marca 2025
24 Lutego 2025
24 Lutego 2025
24 Lutego 2025
24 Lutego 2025
18 Lutego 2025
17 Lutego 2025
11 Lutego 2025