Instrukcja obsługi Eizo ColorEdge CX271
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Eizo ColorEdge CX271 (70 stron) w kategorii monitor. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.6 gwiazdek
Strona 1/70

Important
Please read PRECAUTIONS, this User’s Manual, and the Setup Guide
(separate volume) carefully to familiarize yourself with safe and
effective usage.
• Please refer to the Setup Guide for basic information ranging from
connection of the monitor to a PC or external device to using the
monitor.
• The latest User’s Manual is available for download from our web site:
http://www.eizo.com

2
Location of Caution Statement
This product has been adjusted specically for use in the region to which it was originally shipped. If operated
outside this region, the product may not perform as stated in the specications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior
arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been
made to ensure that this manual provides up-to-date information, please note that EIZO monitor specications are
subject to change without notice.

3
Noticeforthismonitor
Notice for this monitor
Aside from general purposes like creating documents, viewing multimedia content, this product is also suited to
applications such as graphics creation and digital photo processing, where accurate color reproduction is a priority.
This product has been adjusted specically for use in the region to which it was originally shipped. If the product is
used outside the region, it may not operate as specied in the specications.
This product may not be covered by warranty for uses other than those described in this manual.
The specications noted in this manual are only applicable when the following are used:
· Power cords provided with the product
· Signal cables specied by us
Only use optional products manufactured or specied by us with this product.
It takes about 7 minutes (under our measurement conditions) for the performance of electrical parts to stabilize. Please
wait 7 minutes or more after the monitor power has been turned on, and then adjust the monitor.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a
stable display.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to
“Cleaning” (page 4)).
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on
the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.
The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker, please contact
your local EIZO representative.
Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference
patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If the pressure
marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt
to brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may
occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until
the dew condensation disappears, otherwise it may cause some damage to the monitor.
Specyfikacje produktu
Marka: | Eizo |
Kategoria: | monitor |
Model: | ColorEdge CX271 |
Kolor produktu: | Czarny |
Opcja regulacji wysokości: | Tak |
Wbudowany wyłącznik: | Tak |
Częstotliwość wejściowa AC: | 50 - 60 Hz |
Napięcie wejściowe AC: | 100 - 240 V |
Podręcznik użytkownika: | Tak |
Wbudowane głośniki: | Nie |
Certyfikaty: | CB, TUV/GS, CE, cTUVus, FCC-B, ICES-003-B, VCCI-B, c-Tick, GOST-R, RoHS, WEEE, CUDO |
Maksymalne zużycie mocy: | 99 W |
Typ HD: | Quad HD |
Typ ekranu: | IPS |
Długość przekątnej ekranu: | 27 " |
Zakres temperatur (eksploatacja): | 0 - 35 °C |
Zakres wilgotności względnej: | 20 - 80 % |
Rozdzielczość: | 2560 x 1440 px |
Współczynnik kontrastu (typowy): | 1000:1 |
Natywne proporcje obrazu: | 16:9 |
Ekran dotykowy: | Nie |
Pobór mocy w trybie czuwania: | 0.5 W |
Kompatybilność 3D: | Nie |
Pobór mocy: | 43 W |
Diody LED: | Tak |
Ilość portów DVI-D: | 1 |
Ilość portów HDMI: | 1 |
Ilość DisplayPort: | 1 |
Jasność wyświetlacza (typowa): | 300 cd/m² |
Technologia wyświetlacza: | LED |
Typ podświetlacza: | W-LED |
Kąt widzenia (poziomy): | 178 ° |
Kąt widzenia (pionowy): | 178 ° |
Kolory wyświetlacza: | 1.073 billionów kolorów |
Czas odpowiedzi (typowy): | 6 ms |
Rozmiar plamki: | 0.2331 x 0.2331 mm |
Częstotliwość odświeżania poziomego: | 15 - 89 kHz |
Częstotliwość odświeżania pionowego: | 23.75 - 63 Hz |
Rozmiar obrazu (w poziomie): | 596.7 mm |
Rozmiar obrazu (w pionie): | 335.6 mm |
Wbudowana kamera/aparat: | Nie |
Pozycjonowanie na rynku: | Projektowanie grafiki |
Standard VESA: | Tak |
Interfejs do montażu panelu: | 100 x 100 mm |
Kensington Lock: | Nie |
Regulacja wysokości: | 151.5 mm |
Oś obrotu: | Tak |
Kąt obrotu wokół osi: | 0 - 90 ° |
Obrotowe: | Tak |
Obracany: | 0 - 344 ° |
Zakres kąta nachylenia: | 0 - 25 ° |
Wersja USB hub: | 2.0 |
Ilość portów USB Typu A downstream: | 4 |
HDCP: | Tak |
Zużycie energii w trybie energooszczędnym: | 0.7 W |
Szerokość urządzenia (z podstawą): | 646 mm |
Głębokość urządzenia (z podstawą): | 281.5 mm |
Wysokość urządzenia (z podstawą): | 576.5 mm |
Waga (z podstawą): | 12800 g |
Szerokość (bez podstawy): | 646 mm |
Głębokość (bez podstawy): | 92 mm |
Wysokość (bez podstawy): | 402 mm |
Waga (bez podstawy): | 8800 g |
Paleta barw: | 99 % |
Obsługiwane rozdzielczości grafiki: | 2560 x 1440 |
Wbudowany tuner tv: | Nie |
OSD: | Tak |
Port DVI: | Tak |
Liczba języków OSD: | 9 |
Format obrazu: | 16:9 |
Języki menu ekranowego: | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, SWE |
Zainstalowano Thin Client: | Nie |
Regulacja pochylenia: | Tak |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Eizo ColorEdge CX271, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje monitor Eizo
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
25 Września 2024
25 Września 2024
Instrukcje monitor
- monitor Panasonic
- monitor EverFocus
- monitor NEC
- monitor Neets
- monitor Monacor
- monitor Mitsai
- monitor Corsair
- monitor Viotek
- monitor Apple
- monitor KeepOut
- monitor Transvideo
- monitor Tripp Lite
- monitor Hisense
- monitor Schneider
- monitor Sunny
Najnowsze instrukcje dla monitor
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025