Instrukcja obsługi Eizo DuraVision FDS1904T

Eizo monitor DuraVision FDS1904T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Eizo DuraVision FDS1904T (58 stron) w kategorii monitor. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.3 gwiazdek

Pobierz PDF

Strona 1/58

Important

Please read this User’s Manual, and the Setup Manual (separate

volume) carefully to familiarize yourself with safe and e󰀨ective usage.

• Please refer to the Setup Manual for basic information ranging from

monitor installation to using the monitor.

• The latest User’s Manual is available for download from our web site:

www.eizoglobal.com

User’s Manual

Color LCD Monitor

Touch Panel Color LCD Monitor

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

e󰀨ort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

Notice for this monitor

This product may not be covered by warranty for uses other than those described in the Setup Manual.

The specications noted in this manual are only applicable when the following are used:

• Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

If you place this product on a lacquer-coated desk, the color may adhere to the bottom of the stand due to

the composition of the rubber. Check the desk surface before use.

It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more

after the monitor power has been turned on, and then adjust the monitor.

Monitors should be set to a lower brilliance to reduce changes in luminosity caused by long-term use and

maintain a stable display.

When the screen image is changed after displaying the same image for extended periods of time, an

afterimage may appear. Use the screen saver or power save function to avoid displaying the same image for

extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer

to “Cleaning” (page 4)).

The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may

appear on the LCD panel, this is not a malfunction. Percentage of e󰀨ective dots: 99.9994% or higher.

The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker,

please contact your local EIZO representative.

Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do

not attempt to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation

may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead

wait until the dew condensation disappears, otherwise it may cause some damage to the monitor.

When mounting the monitor in an enclosure, always ground the monitor to avoid the e󰀨ects of static

electricity on the monitor internals and LCD panel.

(Cautions for the Use of the Touch Panel)

• During touch operation

Be careful of the following points. Otherwise, damage may occur to the monitor.

- Do not strongly press, scratch, or poke the panel.

- Do not touch the panel with hard objects such as ballpoint pens or metals.

Specyfikacje produktu

Marka:	Eizo
Kategoria:	monitor
Model:	DuraVision FDS1904T
Kolor produktu:	Czarny
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	85-264 V
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Certyfikaty:	CB, CE, WEEE, IEC60945, IEC62288/IEC61174/IEC62388, KC
Maksymalne zużycie mocy:	64 W
Obsługiwane systemy operacyjne Windows:	Tak
Długość przekątnej ekranu:	19 "
Zakres wilgotności względnej:	10 - 90 %
Rozdzielczość:	1280 x 1024 px
Współczynnik kontrastu (typowy):	2000:1
Typ ekranu dotykowego:	Blad
Technologia dotyku:	Multi-touch
Ekran dotykowy:	Tak
Pobór mocy w trybie czuwania:	7 W
Ilość portów DVI-D:	1
Typ podświetlacza:	LED
Kształt ekranu:	Płaski
Kąt widzenia (poziomy):	178 °
Kąt widzenia (pionowy):	178 °
Kolory wyświetlacza:	16.78 millionów kolorów
Czas odpowiedzi (typowy):	20 ms
Rozmiar plamki:	0.294 x 0.294 mm
NVIDIA G-SYNC:	Nie
AMD FreeSync:	Nie
Wbudowana kamera/aparat:	Nie
Liczba portów VGA (D-Sub):	3
Zużycie energii w trybie energooszczędnym:	9 W
Szerokość (bez podstawy):	429 mm
Głębokość (bez podstawy):	75 mm
Wysokość (bez podstawy):	406 mm
Waga (bez podstawy):	6400 g
Typ zasilacza:	AC/DC
Jasność:	540 cd/m²
Port DVI:	Tak
Montaż naścienny / rzutowanie na sufit:	Tak
Wbudowany mikrofon:	Nie
Format obrazu:	5:4
Część widoczna ekranu:	376.3 x 301 mm
Języki menu ekranowego:	Angielski
Ilość portów upstream:	1
Rodzaj portuUSB upstream:	USB Typu B
Ilość symultanicznych punktów dotyku:	5
Oddzielna synchronizacja H/V:	Tak
Technologia touchscreen:	Pojemnościowa
Złożona synchronizacja:	Tak
Sync-on-green (SOG):	Tak