Instrukcja obsługi Eizo FORIS FS2735
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Eizo FORIS FS2735 (78 stron) w kategorii monitor. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 9 użytkowników na średnio 4.2 gwiazdek
Strona 1/78

Important
Please read PRECAUTIONS, this User’s Manual, and the Setup Guide
(separate volume) carefully to familiarize yourself with safe and
effective usage.
• Please refer to the Setup Guide for basic information ranging from
connection of the monitor to a PC or external device to using the
monitor.
• The latest User’s Manual is available for download from our web site:
http://www.eizoglobal.com
Color LCD Monitor
User’s Manual

2
Location of Caution Statement
AVER ISST EMENT
WARNING
WARNUNG
This product has been adjusted specically for use in the region to which it was originally shipped. If
operated outside this region, the product may not perform as stated in the specications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless
prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every
effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specications are subject to change without notice.

3
Introduction
Introduction
Notice for This Monitor
This product is suited to purposes like displaying video games and viewing multimedia content.
This product has been adjusted specically for use in the region to which it was originally shipped. If the
product is used outside the region, it may not operate as specied in the specications.
This product may not be covered by warranty for uses other than those described in this manual.
The specications noted in this manual are only applicable when the following are used:
• Power cords provided with the product
• Signal cables specied by us
Only use optional products manufactured or specied by us with this product.
If you place this product on a lacquer-coated desk, the color may adhere to the bottom of the stand due
to the composition of the rubber. Check the desk surface before use.
It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or
more after the monitor power has been turned on, and then adjust the monitor.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use
and maintain a stable display.
When the screen image is changed after displaying the same image for extended periods of time, an
afterimage may appear. Use the screen saver or power save function to avoid displaying the same image
for extended periods of time.
If the monitor displays continuously over a long period of time, dark smudges or burn-in may appear. To
maximize the life of the monitor, we recommend the monitor be turned off periodically.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime
(refer to “Cleaning” (page 4)).
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels
may appear on the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994 % or
higher.
The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker,
please contact your local EIZO representative.
Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such
as interference patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage
your panel. (If the pressure marks remain on the panel, leave the monitor with a black or white screen.
The symptom may disappear.)
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel.
Do not attempt to brush with tissues as this may scratch the panel.
Specyfikacje produktu
Marka: | Eizo |
Kategoria: | monitor |
Model: | FORIS FS2735 |
Kolor produktu: | Czarny |
Opcja regulacji wysokości: | Tak |
Częstotliwość wejściowa AC: | 50 - 60 Hz |
Napięcie wejściowe AC: | 100 - 240 V |
Bluetooth: | Nie |
Wbudowane głośniki: | Tak |
Ilość głośników: | 2 |
Moc wyjściowa (RMS): | 2 W |
Certyfikaty: | CB, CE, TUV/GS, cTUVus, FCC-B, Canadian ICES-003-B, TUV/S, PSE, VCCI-B, Radio Act (Japan), RPC, NCC, CCC, SRRC, EAC, KC, E-standby, WEEE, TUV/Ergonomie, EU Energy Label, China Energy Label |
Wyjścia słuchawkowe: | 1 |
Wtyk słuchawek: | 3,5 mm |
Maksymalne zużycie mocy: | 87 W |
Typ HD: | Quad HD |
Typ ekranu: | IPS |
Długość przekątnej ekranu: | 27 " |
Zakres temperatur (eksploatacja): | 5 - 35 °C |
Zakres wilgotności względnej: | 20 - 80 % |
Rozdzielczość: | 2560 x 1440 px |
Współczynnik kontrastu (typowy): | 1000:1 |
Natywne proporcje obrazu: | 16:9 |
Ekran dotykowy: | Nie |
Skrócona instrukcja obsługi: | Tak |
Przewody: | AC, DisplayPort, USB |
Pobór mocy w trybie czuwania: | 0.5 W |
Wyjście na słuchawki: | Tak |
Przewodowa sieć LAN: | Nie |
Zintegrowany czytnik kart: | Nie |
Pobór mocy: | 33 W |
Diody LED: | Tak |
Ilość portów DVI-D: | 1 |
Ilość portów HDMI: | 2 |
Zasilanie: | Tak |
Ilość DisplayPort: | 1 |
Jasność wyświetlacza (typowa): | 350 cd/m² |
Technologia wyświetlacza: | LED |
Kąt widzenia (poziomy): | 178 ° |
Kąt widzenia (pionowy): | 178 ° |
Kolory wyświetlacza: | 16.78 millionów kolorów |
Czas odpowiedzi (typowy): | 4 ms |
Rozmiar plamki: | 0.233 x 0.233 mm |
Rozmiar obrazu (w poziomie): | 596.7 mm |
Rozmiar obrazu (w pionie): | 335.7 mm |
Wbudowana kamera/aparat: | Nie |
Standard VESA: | Tak |
Interfejs do montażu panelu: | 100 x 100 mm |
Kensington Lock: | Nie |
Regulacja wysokości: | 155 mm |
Oś obrotu: | Tak |
Kąt obrotu wokół osi: | 0 - 90 ° |
Obrotowe: | Nie |
Zakres kąta nachylenia: | -5 - 35 ° |
Wbudowany USB hub: | Tak |
Wersja USB hub: | 3.2 Gen 1 (3.1 Gen 1) |
Wejście audio: | Tak |
HDCP: | Tak |
Zużycie energii w trybie energooszczędnym: | 0.5 W |
Szerokość urządzenia (z podstawą): | 618.8 mm |
Głębokość urządzenia (z podstawą): | 197.9 mm |
Wysokość urządzenia (z podstawą): | 548.7 mm |
Waga (z podstawą): | 7100 g |
Szerokość (bez podstawy): | 618.8 mm |
Głębokość (bez podstawy): | 56.6 mm |
Wysokość (bez podstawy): | 362.1 mm |
Waga (bez podstawy): | 4600 g |
Zgodny ze standradami przemysłowymi: | RoHS |
Instrukcja użytkow. na płycie CD-ROM: | Tak |
Wbudowany tuner tv: | Nie |
OSD: | Tak |
Port DVI: | Tak |
Liczba języków OSD: | 9 |
Kolor nóżek: | Czarny |
Format obrazu: | 16:9 |
Wyjście audio: | Tak |
Języki menu ekranowego: | CHI (SIMPL), CHI (TR), DEU, ENG, FRE, ITA, JPN, SWE |
Wbudowany subwoofer: | Nie |
Zainstalowano Thin Client: | Nie |
Regulacja pochylenia: | Tak |
Oddzielna synchronizacja H/V: | Tak |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Eizo FORIS FS2735, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje monitor Eizo
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
25 Września 2024
25 Września 2024
Instrukcje monitor
- monitor Pyle
- monitor CSL
- monitor Deltaco
- monitor RGBlink
- monitor Hikvision
- monitor Sunstech
- monitor Bearware
- monitor Ikegami
- monitor Promethean
- monitor Titan Army
- monitor Archos
- monitor GeChic
- monitor Neat
- monitor Prowise
- monitor Xiaomi
Najnowsze instrukcje dla monitor
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025