Instrukcja obsługi Eureka Copper Canyon 8

Eureka namiot Copper Canyon 8

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Eureka Copper Canyon 8 (2 stron) w kategorii namiot. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.7 gwiazdek

Strona 1/2
Component List: 1 Tent Body, 6 Wall Poles, 3 Roof Poles
1 Fly with Guy Ropes, 1 Carry Bag, 1 Stake Bag/Stakes, 1 Pole Bag
This is a large tent;
Set-up is both faster
and easier with two
people.
Spread the tent out with the top side up. Assemble the roof poles and slide the black poles
into black trimmed sleeves diagonally across the roof. Then slide the gray roof pole into
the gray trimmed sleeve
and over the black poles.
Assembly Instructions for
Copper Canyon 8
rev. A 6.2011
Center Wall poles
Corner Wall poles
Roof poles
Insert the gray pole
into the ribbed
section of the
mid elbows.
Insert the black poles into the corner elbows.
Raise one side of the roof and
insert the wall poles into the
bottom of the elbows.
Insert the pin from the
web/rings into the
bottom ferrules.
Raise the other side and the center to make a freestanding structure.
Dress out the tent as
you stake the web
loops down.
Attach the J-hooks to the
nylon
rings on the webs.
At the corners, reach under the fly and wrap the
hook & loop straps around the wall poles.
Then wrap the center poles.
Lastly, this a tall, straight sided tent; it is important
that you stake out the guylines at each elbow.
YOUR TENT IS READY !
Clip the tent to the wall poles.
Drape the fly across the tent so
that the yellow webs meet.
Pull the fabric out and over
the corner elbows.


Specyfikacje produktu

Marka: Eureka
Kategoria: namiot
Model: Copper Canyon 8

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Eureka Copper Canyon 8, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą