Instrukcja obsługi Festo DADP-TU-F3-50
Festo
Nie skategoryzowane
DADP-TU-F3-50
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Festo DADP-TU-F3-50 (2 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 3 użytkowników na średnio 4.7 gwiazdek
Strona 1/2
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product www.festo.com/pk.è
Document Product Contents
Instructions Stopper cylinder DFST-...-G2 Operating
Tab. 1
2 Safety
2.1 Safety instructions
– Only mount the product on components that are in a condition to be safely
operated.
– Observe tightening torques. Unless otherwise specified, the tolerance
is±20%.
2.2 Intended use
Control of toggle lever functions on stopper cylinder DFST-...-G2.
3 Product overview
3.1 Product Range Overview
3.1.1 Scope of delivery
1Locking plate (1x)
2Leg spring (1x)
3Screw (1x)
M4x10
4Split washer (2x)
5Sleeve (1x)
6Pin (2x)
7Hexagon head screw (1x)
8Washer (1x)
9Screw (1x)
M4x15
10 Sleeve (1x)
Fig. 1
3.1.2 Not in scope of delivery
11 Stopper cylinder (1x)
DFST-...-G2
Fig. 2
3.2 Functions
Lever locking mechanism
This function fixes the toggle lever in the upper end position after it is pushed
through when stopping an object.
When the piston rod of the stopper cylinder is retracted, the toggle lever is
unlocked.
Lever deactivating mechanism
This function deactivates the stopping function after the toggle lever has been
manually pressed down.
When the piston rod of the stopper cylinder is retracted, the toggle lever is
unlocked.
4 Mounting
4.1 Assembly
The assembly alternatives for the pins determine the function.6
Lever locking mechan
ism
Lever deactivating mech
anism
Lever locking and lever
deactivating mechanism
Tab. 2 Assembly alternatives
Fig. 3 Positioning pins
1. Slide the pins into the corresponding slot for the locking plate .6 1
2. Position the pins in the clevis foot (A).6
Fig. 4 Fixing the locking plate
• Slide the block[B] under the locking plate .1
ÄPins are fixed.6
DADPTUF3 50 63 80
X [mm] 30 30 43
Tab. 3 Height of block[B]
8107268
DADPTUF350/63/80
Toggle lever function kit
8107268
2019-04
[8107270]
Instructions| Assembly
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Fig. 5 Positioning the leg spring
1. Position the leg spring on the hole for the locking plate .2 1
2. Insert the sleeve into the hole for the locking plate and leg spring .aJ 1 2
3. Position the short shank[C] of the leg spring under the clevis foot[A].2
Fig. 6 Fixing the leg spring
• Slightly tighten the screw with a split washer into the clevis foot[A].9 4
Fig. 7 Tensioning the leg spring
• Press the long shank[D] of the leg spring under the lug[E].2
ÄLeg spring is tensioned.2
Fig. 8 Mounting the locking plate
1. Insert the sleeve into the hole.5
2. Tighten the screw with a split washer . Tightening torque:1.5Nm3 4
3. Tighten screw . Tightening torque:1.5Nm9
4. Remove block[B].
Fig. 9 Mounting the stop
• Tighten the screw with the washer in the stopper cylinder . Comply7 8 aA
with the tightening torque.
DADPTUF3 50 63 80
Tightening torque Nm 2.5 6 6
Tab. 4 Tightening torques
5 Operation
Lever locking mechanism
Use this function to keep the toggle lever securely in the end position defined at
the back. This prevents the object from sliding back through the installed shock
absorber, e.g. to carry out the relevant work steps on the object.
Fig. 10 Lever locking mechanism
• Press the toggle lever[F] through the transported material into the upper end
position.
ÄThe pin clicks audibly into the notch on the toggle lever[F].6
NOTICE!
Breakage of components when toggle lever is locked
Elements of the stopper cylinder or the toggle lever function kit can break when
the toggle lever is actively locked.
• Do not move objects backwards against the locked toggle lever.
Fig. 11 Risk of breakage when toggle lever is locked
Lever deactivating mechanism
Use this function to lock the toggle lever into the lower end position. The trans-
ported material can be moved back and forth in both directions over the deactiv-
ated stopper cylinder, e.g. to eliminate a system error.
Fig. 12 Lever deactivating mechanism
• Press the toggle lever[F] downwards into the end position.
ÄThe pin clicks audibly into the notch on the toggle lever[F].6
Lever unlocking mechanism
Unlock the locked toggle lever as follows and reactivate the stopping function.
Fig. 13 Lever unlocking mechanism
• Pressurise the stopper cylinder so that the piston rod retracts.aA
ÄContact with the screw causes the toggle lever to unlock.7
6 Disassembly
Disassembly is performed in the reverse order to assembly.
CAUTION!
Leg spring under tension
The leg spring can crush or scratch fingers and body parts during disassembly.
• Use a tool to carefully release the tension of the leg spring.
Specyfikacje produktu
| Marka: | Festo |
| Kategoria: | Nie skategoryzowane |
| Model: | DADP-TU-F3-50 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Festo DADP-TU-F3-50, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Nie skategoryzowane Festo
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
Instrukcje Nie skategoryzowane
- Nie skategoryzowane GYS
- Nie skategoryzowane Intel
- Nie skategoryzowane Audio-Technica
- Nie skategoryzowane Meireles
- Nie skategoryzowane Nextorage
- Nie skategoryzowane Flycam
- Nie skategoryzowane Tamron
- Nie skategoryzowane Adder
- Nie skategoryzowane Evga
- Nie skategoryzowane HiFi ROSE
- Nie skategoryzowane Viking
- Nie skategoryzowane Nous
- Nie skategoryzowane IFM
- Nie skategoryzowane Exquisit
- Nie skategoryzowane Playseat
Najnowsze instrukcje dla Nie skategoryzowane
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025