Instrukcja obsługi Fluke i30s

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fluke i30s (10 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 3 użytkowników na średnio 4.4 gwiazdek

PN 2560394

March 2006

©2006 Fluke Corporation. All rights reserved.

®

i30s/i30

AC/DC Current Clamps

Instruction Sheet

Introduction

The i30s AC/DC Current Clamp has been designed for use with

oscilloscopes and DMMs for accurate, non-intrusive

measurement of both AC, DC, and complex waveform currents.

The i30 AC/DC Current Clamp has been designed for use with

DMMs only. Using advanced Hall Effect technology the i30s can

accurately measure currents with a resolution of 1 mA from 5 mA

to 30 A over the frequency range of DC to 100 kHz. These

features make it a powerful tool for use in inverters, switch mode

power supplies, industrial controllers and other applications

requiring current measurements and/or waveform analysis.

Symbols

The table below lists the symbols used on the product and/or in

this manual.

Symbol Description

~Do not dispose of this product as unsorted municipal

waste. Contact Fluke or a qualified recycler for

disposal.

WImportant Information. See manual.

TDouble insulation.

-Do not apply around or remove from the HAZARDOUS

LIVE conductors.

)Conforms to Canadian Standards Association.

PComplies with the relevant European standards.

Specyfikacje produktu