Instrukcja obsługi GE Profile JP940SKSS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla GE Profile JP940SKSS (8 stron) w kategorii piekarnik. Ta instrukcja była pomocna dla 25 osób i została oceniona przez 8 użytkowników na średnio 4.4 gwiazdek

1

TOOLS YOU WILL NEED

MATERIALS YOU WILL NEED

31-10603 (12-04 JR)

Installation

30″Electric Cooktop

Instructions

BEFORE YOU BEGIN

Read these instructions completely

and carefully.

•IMPORTANT —Save these

instructions for local inspector’s use.

•IMPORTANT —Observe all

governing codes and ordinances.

•Note to Installer – Be sure to leave these

instructions with the Consumer.

•Note to Consumer – Keep these

instructions for future reference.

•Product failure due to improper installation

is not covered under the Warranty.

WARNING —This appliance must

be properly grounded.

•ATTENTION INSTALLER —

ALL COOKTOPS MUST BE HARD WIRED

(DIRECT WIRED) INTO AN APPROVED

JUNCTION BOX. A “PLUG AND

RECEPTACLE” IS NOT PERMITTED ON

THESE PRODUCTS.

•Proper installation is the responsibility

of the installer and product failure due to

improper installation is NOT covered under

warranty.

PARTS INCLUDED

Wire Nuts

Junction Box

Saber Saw

Pencil

Safety Glasses

1/8″Drill Bit & Electric

or Hand Drill

Ruler or Straightedge

Phillips Head

Screwdriver

JP340, JP355, JP910, JP930, JP940, JP950

“If you have questions, call 800.GE.CARES or visit our website at:

www.GEAppliances.com”

2 Hold Down

Brackets

4 Screws Foam Tape

Specyfikacje produktu