Instrukcja obsługi GE Profile JS966CDCC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla GE Profile JS966CDCC (12 stron) w kategorii piekarnik. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 3 użytkowników na średnio 4.6 gwiazdek

Skill Level:Average High Low

Completion Time: 1 to 3 Hours

Proper installation is the responsibility of the installer. Product failure due to improper installation

is not covered under the GE Appliance Warranty. See the Owners Manual for warranty

information.

CAUTION: Before you begin

Read these instructions carefully and

completely.

•IMPORTANT- Save these instructions for

local inspector’s use.

•IMPORTANT- Observe all governing codes

and ordinances.

Self Cleaning Radiant

Electric Slide-In Range

Installation

Instructions JSP46, JSP56, JS966

•NOTE TO INSTALLER- Be sure to leave

these instructions with the consumer.

•OWNER- Keep these instructions for future

reference.

•WARNING- This appliance must be

properly grounded. See “Electrical

Requirements” page 2.

Parts Included

Tools You Will Need

Pub. No. 31-10426

229C4053P412 1

“If you have questions, Call 800-GE-CARES or visit our website at:

www.GEAppliances.com”

1/4”Nut

driver

Wrench or Pliers

(for 1 7/16” nut)

Pencil

Hand or

Saber Saw

Straight Edge

or Square

Materials Needed

Lag BoltsAnchor

Sleeves 4- Wire Cord

4’long

3 -Wire Cord

4’long

(For Concrete Floors

Only)

( UL Approved 50 AMP)

OR

1

2

3

4

Drill with

1/8” Bit

Anti-Tip Bracket

Screws

Safety

Glasses

Tape MeasurePliers

Level

Rear Filler

2 Screws

Specyfikacje produktu