Instrukcja obsługi Gigabyte GA-8PENXP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gigabyte GA-8PENXP (112 stron) w kategorii płyta główna. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 6 użytkowników na średnio 4.6 gwiazdek

When you installing AGP card, please make sure the following

notice is fully understood and practiced. If your AGP card has

"AGP 4X/8X(1.5V) notch"(show below), please make sure your AGP

card is AGP 4X/8X (1.5V).

Caution: AGP 2X(3.3V) card is not supported by Intel®845(GE/PE) /

845(E/G) / 850(E)/E7205 / 865(P/G/PE)/875P. You might experience

system unable to boot up normally. Please insert an AGP Pro 4X/8X

(1.5V) card

Example 1: Diamond Vipper V770 golden finger is compatible with

2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X

(1.5V) mode by adjusting the jumper. The factory default for this card is

2X(3.3V).

The GA-8PENXP motherboards might not function properly, if you install

this card without switching the jumper to 4X(1.5V) mode in it.

Example 2: Some ATi Rage 128 Pro graphics cards made by

"Power Color", the graphics card manufacturer & some SiS 305 cards,

their golden finger is compatible with 2X/4X mode AGP slot, but they

support 2X(3.3V) only. The GA-8PENXP motherboards might not function

properly, If you install this card in it.

Note : Although Gigabyte's AG32S(G) graphics card is based on

ATi Rage 128 Pro chip, the design of AG32S(G) is compliance

with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work

fine with Intel®845(GE/PE) / 845(E/G) / 850(E) /E7205 / 865(P/G/PE)/875P.

based motherboards.

Before you install PCI cards, please remove the Dual BIOS

label from PCI slots if there is one.

AGP 4X/8X nohtc

Specyfikacje produktu