Instrukcja obsługi Gigabyte GA-8VT880

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gigabyte GA-8VT880 (120 stron) w kategorii płyta główna. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 3 użytkowników na średnio 4.9 gwiazdek

When you installing AGP card, please make sure the following

notice is fully understood and practiced. If your AGP card has

"AGP 4X/8X(1.5V) notch"(show below), please make sure your AGP

card is AGP 4X/8X (1.5V).

Caution: AGP 2X(3.3V) card is not supported by VIA PT880. You might

experiencesystem unable to boot up normally. Please insert an AGP

4X/8X (1.5V) card

Example 1: Diamond Vipper V770 golden finger is compatible with

2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X

(1.5V) mode by adjusting the jumper. The factory default for this card is

2X(3.3V).

The GA-8VT880 Series motherboards might not function properly, if you

install this card without switching the jumper to 4X(1.5V) mode in it.

Example 2: Some ATi Rage 128 Pro graphics cards made by

"Power Color", the graphics card manufacturer & some SiS 305 cards,

their golden finger is compatible with 2X/4X mode AGP slot, but they

support 2X(3.3V) only. The GA-8VT880 Series motherboards might not

function properly, If you install this card in it.

Note : Although Gigabyte's AG32S(G) graphics card is based on

ATi Rage 128 Pro chip, the design of AG32S(G) is compliance

with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work

fine with VIA PT880 based motherboards.

AGP 4X/8X notch

Specyfikacje produktu