Instrukcja obsługi Highpoint SSD7104

Highpoint Kontroler SSD7104

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Highpoint SSD7104 (82 stron) w kategorii Kontroler. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 4.7 gwiazdek

Pobierz PDF

Strona 1/82

SSD7000 RAID Management Guide

Version 1.07

SSD7000 RAID Management Guide

Table of Contents

HighPoint RAID Management Software...................................................................................................4

Using the HighPoint RAID Management (WebGUI) Software...............................................................5

Starting the WebGUI........................................................................................................................ 5

How to login WebGUI in Windows/Mac............................................................................ 5

How to login WebGUI in Linux..........................................................................................6

Verify the Controller Status..............................................................................................................6

Creating an Array..............................................................................................................................9

Single controller to create an array......................................................................................9

Using the Cross-Sync feature to create an array................................................................12

Array Type......................................................................................................................................15

Adding Spare Disks........................................................................................................................ 19

Obtaining Logical Device Information...........................................................................................21

Array Information &Maintenance Options: Normal Status........................................................... 22

Array Information & Maintenance Options: Critical Status...........................................................23

Array Information & Maintenance Options: Disabled Status........................................................ 24

Physical Device Information.......................................................................................................... 25

System Setting............................................................................................................................................ 26

System Setting................................................................................................................................ 27

Password Settings........................................................................................................................... 28

Email Setting...................................................................................................................................28

Email Precautions........................................................................................................................... 30

Event Tab....................................................................................................................................................34

SHI (Storage Health Inspector)................................................................................................................ 34

How to Enable SMART Monitoring.............................................................................................. 35

How to Use the Health Inspector Scheduler...................................................................................37

How to Create a New Verify Task..................................................................................................38

Log collecting..............................................................................................................................................39

Diagnostic view.............................................................................................................................. 39

Log saving.......................................................................................................................................40

Using the HighPoint Command Line Interface (CLI)............................................................................40

How to use the CLI in Windows.................................................................................................... 40

How to use the CLI in a Linux system........................................................................................... 41

CLI Command Reference............................................................................................................... 41

Query Commands........................................................................................................................... 42

query controllers................................................................................................................ 42

query enclosures................................................................................................................ 42

query devices..................................................................................................................... 45

query devices {device_id}.................................................................................................48

query arrays....................................................................................................................... 49

query arrays {arrays_id}....................................................................................................50

Init Commands................................................................................................................................51

init {device_id}..................................................................................................................51

init {array_id} {start|stop}.................................................................................................51

Create Commands...........................................................................................................................52

Delete Command............................................................................................................................ 54

Unplug Command...........................................................................................................................55

Rebuild Commands.........................................................................................................................56

rebuild {array_id} {device_id}......................................................................................... 56

rebuild {array_id} {start|stop}...........................................................................................57

Verify Command............................................................................................................................ 57

Rescan Command........................................................................................................................... 58

Lscard Command............................................................................................................................59

SSD7000 RAID Management Guide

Events Commands.......................................................................................................................... 59

events................................................................................................................................. 59

events save {file_name}.................................................................................................... 60

Mail Commands..............................................................................................................................60

mail recipient..................................................................................................................... 60

mail recipient add {recipient_name} {mail_address} [Inf|War|Err]................................. 61

mail recipient delete {recipient_name}............................................................................. 61

mail recipient test {recipient_name}................................................................................. 61

mail recipient set {recipient_name} {Inf|War|Err}........................................................... 62

mail server......................................................................................................................... 62

mail server set {server_address} {port} {ssl} {status} {from_address} [username]

[password]..........................................................................................................................62

mail server set {a|p|s|m|u|t} {value}.................................................................................. 63

Task Commands............................................................................................................................. 64

task.....................................................................................................................................65

task rebuild {array_id}{name=}{once|daily|weekly|monthly={day} interval={interval}

start=mm/dd/yyyy end=mm/dd/yyyy time=hh:mm:ss...................................................... 65

task verify.......................................................................................................................... 67

task delete {task_id}..........................................................................................................67

task enable {task_id}......................................................................................................... 68

task disable {task_id}........................................................................................................ 68

Set Commands................................................................................................................................ 69

set.......................................................................................................................................69

Diag Commands............................................................................................................................. 72

Help Commands............................................................................................................................. 72

help.................................................................................................................................... 73

help {command}................................................................................................................73

Exit Command................................................................................................................................ 74

Clear Commands.............................................................................................................................74

Troubleshooting......................................................................................................................................... 75

Table 1. WebGUI Icon Guide................................................................................................................... 76

Table 2. RAID Level Reference Guide.....................................................................................................78