Instrukcja obsługi Hikvision DS-2CE56F7T-(A)VPIT3Z

Hikvision Kamera monitorująca DS-2CE56F7T-(A)VPIT3Z

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision DS-2CE56F7T-(A)VPIT3Z (7 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.3 gwiazdek

Pobierz PDF

Strona 1/7

TURBO HD

D(F) Series Dome 7T

Camera

User Manual

UD00351B

User Manual

Thank you for purchasing our product. If there are any

questions, or requests, please do not hesitate to

contact the dealer.

This manual applies to the models below:

Type

Model

Type I Camera

DS-2CE56D(F) -AVPIT3Z 7T

DS-2CE56D(F) -VPIT3Z 7T

Type Camera II

DS-2CE56D(F) -AITZ 7T

DS-2CE56D(F) - Z 7T IT

This manual may contain several technical incorrect

places or prinng errors, and the content is subject to

change without noce. The updates will be added to

the new version of this manual. We will readily improve

or update the products or procedures described in the

manual.

0100 60110010 9

Privacy Noce

Surveillance laws vary by jurisdicon. Check all relevant

laws in your jurisdicon before using all this product for

surveillance purpose to ensure that your use of this

product conforms.

Regulatory Informaon

FCC Informaon

FCC compliance: This equipment has been tested and

found to comply with the limits for a digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protecon against

harmful interference when the equipment is operated

in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instrucon manual, may cause harmful interference to

radio communicaons. Operation of this equipment in a

residenal area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

FCC Condions

This device complies with part 15 of the FCC Rules.

Operaon is subject to the following two condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired

operaon

EU Conformity Statement

This product and - if applicable - the

supplied accessories too are marked with

"CE" and comply therefore with the

applicable harmonized European

standards listed under the Low Voltage Direcve

2006/95/EC, the EMC Direcve 2004/108/EC.

2002/96/EC (WEEE direcve): Products

marked with this symbol cannot be

disposed of as unsorted municipal waste in

the European Union. For proper recycling,

return this product to your local supplier

upon the purchase of equivalent new equipment, or

dispose of it at designated collecon points. For more

informaon see: www.recyclethis.info.

2006/66/EC (baery direcve): This

product contains a baery that cannot be

disposed of as unsorted municipal waste in

the European Union. See the product

documentaon for specic baery

informaon. The baery is marked with

this symbol, which may include leering to indicate

cadmium (Cd), lead (Pb), or mercury (Hg). For proper

recycling, return the baery to your supplier or to a

designated collecon point. For more informaon see:

www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A)

standards requirements.

1 Introducon

1.1 Product Features

This series of camera adopts high performanc sensor e

and advanced circuit board design technology. It

features high resoluon, low distoron, and low noise,

etc. It is suitable for surveillance system and image

process system.

The main features are as follows:

 High performance CMOS sensor and high resoluon

bring high-quality image;

 Low illuminaon, 0.01 Lux @ (F1.2, AGC ON), 0 Lux

with IR;

 IR cut lter with auto switch;

 OSD menu, parameters are congurable;

 Auto white balance and internal synchronization;

 SMART IR mode;

 True WDR;

 Advanced 3-axis design meets dierent installation

requirements

1.2 Overview

 The cables of device vary according to dierent models. The

cables of each type are shown in the gures below, please

refer to the actual sample.

 You can debug the camera by connecng an auxiliary HD

TVI cable to the auxiliary video output.

1.2.1 Overview of Type I Camera

Bubble

Auxiliary

Video Output

Lens

Back Box

Menu Buon

Video Cable

24VAC/ VDC 12

Power Cord

Cables

Video Cable

DC V Power Cord 12

Model I Cables

Model II Cables

Figure 1-1 Overview of Type I Camera

1.2.2 Overview of Type Camera II

Bubble

Auxiliary

Video Output

Lens

Back Box

Menu Buon

Video Cable

24VAC/ VDC 12

Power Cord

Cables

Video Cable

12VDC Power Cord

Model I Cables

Model II Cables

Base Plate

Figure 1-2 Overview of Type II Camera

Specyfikacje produktu

Marka:	Hikvision
Kategoria:	Kamera monitorująca
Model:	DS-2CE56F7T-(A)VPIT3Z
Kolor produktu:	Grey,Silver
Typ produktu:	IP Phone
Wysokość produktu:	203 mm
Szerokość produktu:	176.7 mm
Głębokość produktu:	152 mm
Waga produktu:	900 g
Certyfikaty:	X.509v3, CE, FCC Part 15 (CFR 47) Class B, ICES-003 Class B, EN55022 Class B, CISPR22 Class B, AS/NZS CISPR 22 Class B, CISPR 24, VCCI Class B, EN55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1\r\nFCC Part 68 (CFR47) HAC, TIA 810A
Pełny dupleks:	Tak
Ilość portów Ethernet LAN (RJ-45):	2
Obsługa PoE:	Tak
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	10 - 95 %
Rozdzielczość:	192 x 64 px
Wyciszenie mikrofonu:	Tak
Głośnik:	Tak
Połączenie oczekujące:	Tak
Nazwa i identyfikacja dzwoniącego:	Tak
Prędkość wybierania numeru:	Tak
Przewodowa sieć LAN:	Tak
Szyfrowanie / bezpieczeństwo:	128-bit AES
Zakres temperatur (przechowywanie):	-10 - 60 °C
Klient DHCP:	Tak
Wymiary produktu (SxGxW):	176.7 x 203 x 152 mm
Kolory wyświetlacza:	Monochromatyczne
Zgodny ze standradami przemysłowymi:	IEEE 802.3af, IEEE 802.1 p/q
Aktualizacje oprogramowania urządzenia:	Tak
Regulacja głośności:	Cyfrowy
Obsługiwane protokoły sieciowe:	CallManager 3.3(5)SR2, 4.1(3)SR3a, 4.2(1)SR1, SCCP, SIP 5.0(2)+, TFTP
Kodeki glosu:	G.729B,G.711,G.711a,G.729A,iLBC,G.729a
Bezpieczeństwo:	UL 60950, CSA C22.2 60950, EN 60950, IEC 60950, AS/NZS60950, TS 001
Obsługa funkcji Plug & Play:	Tak
Montaż naścienny / rzutowanie na sufit:	Tak
Możłiwość przekazywania połączenia:	Tak
Współ. z wieloma stacjami bazowymi:	Nie
Ponowne wybieranie numeru:	Tak
Ilość linii:	- linii
Podświetlane klawisze:	Tak
Tworzywo obudowy:	ABS
Typ montażu:	Biurko / Ściana