Instrukcja obsługi Honeywell TH1010D2000/U

Honeywell termostat TH1010D2000/U

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell TH1010D2000/U (24 stron) w kategorii termostat. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 9 użytkowników na średnio 4.7 gwiazdek

Strona 1/24
Package Includes:
T1 Pro Thermostat
UWP™ Mounting System
Decorative Cover Plate
Screws and Anchors
2 AA Batteries
Thermostat Literature
T1 Pro
Non-Programmable
Thermostat
Installation Instructions
+
Heat
Menu
Fan Auto
TH1110D2009,
TH1010D2000,
Read before installing
Optional Cover Plate installation
NOTE: If Optional Cover Plate is not
required, see “UWP Mounting System
installationon next page.
Use the Optional Cover Plate when
you need to cover paint gap from old
thermostat.
There are different cover plates
depending on when the thermostat was
manufactured.
For the square cover plate:
1. Separate the Cover Plate from
Mounting Plate.
2. Mount the Mounting Plate on to the
wall using any of the 8 screw holes.
Insert and tighten mounting screws
supplied with Cover Plate Kit. Do not
overtighten. See Figure 2. Make sure
the Mounting Plate is level.
3. Attach the UWP by hanging it on the
top hook of the Mounting Plate and
then snapping the bottom of the UWP
in place. See Figure 3.
4. Snap the Cover Plate onto the
Mounting Plate. See Figure 4.
Use supplied
screws and
wall anchors
4
32
1


Specyfikacje produktu

Marka: Honeywell
Kategoria: termostat
Model: TH1010D2000/U

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Honeywell TH1010D2000/U, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą