Instrukcja obsługi Hoshizaki F-801MWJ-C
Hoshizaki
Maszyna do lodu
F-801MWJ-C
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hoshizaki F-801MWJ-C (121 stron) w kategorii Maszyna do lodu. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 9 użytkowników na średnio 4.9 gwiazdek
Strona 1/121
Models
H and J Series
Modular Flaker with
F-A and F-C Control Boards
Service Manual
Number: 73204
Issued: 7-23-2014
Revised: 9-21-2016
hoshizakiamerica.com
2
WARNING
Only qualied service technicians should install and service the appliance. To
obtain the name and phone number of your local Hoshizaki Certied Service
Representative, visit www.hoshizaki.com. No service should be undertaken until
the technician has thoroughly read this Service Manual. Failure to service and
maintain the appliance in accordance with this manual will adversely affect safety,
performance, component life, and warranty coverage and may result in costly water
damage. Proper installation is the responsibility of the installer. Product failure or
property damage due to improper installation is not covered under warranty.
Hoshizaki provides this manual primarily to assist qualied service technicians in the
service of the appliance.
Should the reader have any questions or concerns which have not been satisfactorily
addressed, please call, send an e-mail message, or write to the Hoshizaki Technical
Support Department for assistance.
Phone: 1-800-233-1940; (770) 487-2331
Fax: 1-800-843-1056; (770) 487-3360
E-mail: techsupport@hoshizaki.com
618 Highway 74 South
Peachtree City, GA 30269
Attn: Hoshizaki Technical Support Department
Web Site: www.hoshizaki.com
NOTE: To expedite assistance, all correspondence/communication MUST include the
following information:
• Model Number
• Serial Number
• Complete and detailed explanation of the problem.
3
CONTENTS
Important Safety Information 6 .................................................................................................
I. Construction and Water/Refrigeration Circuit Diagram 8 .......................................................
A. Construction 8 ..................................................................................................................
1. Air-Cooled Models .................................................................................................... 8
2. Water-Cooled Models ............................................................................................. 9
3. Remote Air-Cooled Models .................................................................................... 10
4. Low-Side, Parallel Rack System Models ................................................................11
B. Icemaking Unit ............................................................................................................ 12
C. Water/Refrigeration Circuit Diagram ............................................................................ 13
1. Air-Cooled Models .................................................................................................. 13
2. Water-Cooled Models ............................................................................................ 14
3. Remote Air-Cooled Models .................................................................................... 15
4. Low-Side, Parallel Rack System Models ............................................................... 16
II. Sequence of Operation and Service Diagnosis ............................................................... 17
A. Sequence of Operation Flow Chart ............................................................................. 17
1. Icemaking and Drain Cycle .................................................................................... 17
2. Shutdown .............................................................................................................. 18
B. Service Diagnosis ....................................................................................................... 19
C. Control Board Check 25 ...................................................................................................
D. Bin Control Check 30 .......................................................................................................
E. Float Switch Check and Cleaning 34 ...............................................................................
F. Diagnostic Tables ......................................................................................................... 36
III. Controls and Adjustments 39 ...............................................................................................
A. Control Board 39 ..............................................................................................................
1. Control Board Layout 40 .............................................................................................
2. LED Lights and Audible Alarm Safeties 41 .................................................................
3. Ice Purge Cycle Bypass 42 .........................................................................................
B. Controls and Adjustments 42 ...........................................................................................
1. Default Dip Switch Settings 42 ....................................................................................
2. BC1 (Infrared Sensor) Shutdown Delay (S1 dip switch 1, 2, 3) 43 .............................
3. Drain Frequency Control (S1 dip switch 4) 43 ............................................................
4. Continuous Dispensing Timer (S1 dip switch 5 & 6) 43 ..............................................
5. Bin Control Selector (S1 dip switch 7) 44 ...................................................................
6. BC(2) (Mech. Stand-Alone or Backup (only)) Shutdown Delay (S1 dip switch 8) 44 ..
7. Factory Use (S1 Dip Switch 9 & 10) 44 .......................................................................
C. Power Switch and Control Switch 45 ................................................................................
IV. Refrigeration Circuit and Component Service Information.............................................. 46
A. Refrigeration Circuit Service Information 46 ....................................................................
B. Component Service Information 49 ..................................................................................
IMPORTANT
This manual should be read carefully before the appliance is serviced. Read
the warnings and guidelines contained in this manual carefully as they provide
essential information for the continued safe use, service, and maintenance of the
appliance. Retain this manual for any further reference that may be necessary.
Specyfikacje produktu
| Marka: | Hoshizaki |
| Kategoria: | Maszyna do lodu |
| Model: | F-801MWJ-C |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Hoshizaki F-801MWJ-C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do lodu Hoshizaki
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
Instrukcje Maszyna do lodu
- Maszyna do lodu Guzzanti
- Maszyna do lodu Steba
- Maszyna do lodu KitchenAid
- Maszyna do lodu Yamazen
- Maszyna do lodu Dash
- Maszyna do lodu Kalorik
- Maszyna do lodu SPT USA
- Maszyna do lodu Orien
- Maszyna do lodu Hestan
- Maszyna do lodu G3 Ferrari
- Maszyna do lodu DeLonghi
- Maszyna do lodu Solis
- Maszyna do lodu Princess
- Maszyna do lodu Lentz
- Maszyna do lodu Brandt
Najnowsze instrukcje dla Maszyna do lodu
12 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025
10 Stycznia 2025
10 Stycznia 2025
10 Stycznia 2025
9 Stycznia 2025