Instrukcja obsługi Hotpoint SH6 A2Q XRD

Hotpoint lodówka SH6 A2Q XRD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hotpoint SH6 A2Q XRD (15 stron) w kategorii lodówka. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.3 gwiazdek

Pobierz PDF

Strona 1/15

1. Fan*

2. Electronic control panel / light unit

3. Bottle rack*

4. Sensor cover

5. Area shelves

6. Rating plate with commercial name

7. Fruits and vegetables crisper*

8. Door reversibility kit

9. Bottle holder*

10. Door trays

11. Door seal

* Available on selected models

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts the

operation automatically. After starting the appliance, wait

at least 4-6 hours before placing food into the appliance.

When the appliance is connected to the power supply,

the display lights up and all the icons appear on the

display for approximately 1 second. The default (factory)

values of the fridge compartment settings light-up.

HOW TO REVERSE THE DOOR SWING

- see enclosed Instructions for Use (Version_2)

Is recommended to reverse door swing by two persons.

There is not foreseen door reversibility for:

- models with integrated handle

- models with glass panel on the door.

Specifications, technical data and images may vary

from model to model

To receive the assistance call the number shown on

the warranty booklet or follow the instruction on the

web site www.hotpoint.eu

Read the Instructions for Use carefully before

using the appliance.

QUICK START GUIDE

ALARMS TABLE

ALARM TYPE Signal Cause Cure

Door open alarm Refrigerator Light blinks The door has remained open for more than 5 minutes. Close the door

Door open alarm Refrigerator Light OFF The door has remained open for more than 8 minutes. Close the door

Malfunction Any temperature indicators blinks Product malfunction. Contact the After-sales Service

FAN

The fan improves temperature distribution inside the refrigerator compartment,

allowing better preservation of stored food.

By default, the fan is switched on.

It is advisable to keep the fan switched on when the ambient air temperature is above

27 - 28°C or if you notice drops of water on the glass shelves or in sever humidity

conditions.

To turn off the fan press the button of fan.

Please note that when the fan is switched on it will not continuously work. The fan

will start/stop working depending on the temperature and/or humidity level inside the

fridge.

It is therefore absolutely normal if the fan does not move even if the fan is switched on.

on - o

TEMPERATURE button

Press the Temperature button on the control panel to adjust the temperature from the

warmest through the lower to the coldest level.

Pressing the Temperature button, the temperature setting will change cyclically.

At first plug-in of appliance temperature setpoint is present at medium position

(factory setting).

Following table shows temperature setpoints:

Note: Displayed set points correspond to the average temperature

throughout the whole refrigerator.

Led ON Led OFFLed ON Led OFF

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

REFRIGERATOR LIGHT

The light system inside the refrigerator compartment uses LEDs

light, allowing a better lightning as well as a very low energy

consumption.

If the LED light system does not work, please contact the

Service to replace it.

Important: The refrigerator compartment light switches on

when the refrigerator door is opened. If the door is kept open for

more then 8 minutes the light will be automatically switched off.

Indicator LEDs to display the current temperature

setpoint or the Fast Cooling function.

FAST COOLING function

The use of the Fast Cooling function is recommended:

- to increase the cooling speed of the refrigerator

compartment when placing a very high quantity of food

within it,

To activate the Fast Cooling function, press and hold

for 3 seconds the Temperature button on the control

panel till all the 3 LEDs will turn on.

Led ON Led OFFLed ON Led OFF

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

The function is automatically deactivated after 6 hours

and return to previous selected set point. The function

can be manually deactivated by pressing and holding for

3 seconds the Temperature button on the control panel.

TEMPERATURE button

FAST COOLING button

Led ON Led OFFLed ON Led OFF

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

5892140900

IT ES PT BG CS FR HU KK PL RO RU SK

Specyfikacje produktu

Marka:	Hotpoint
Kategoria:	lodówka
Model:	SH6 A2Q XRD
Kolor produktu:	Stal nierdzewna
Regulowany termostat:	Tak
Wbudowany wyświetlacz:	Nie
Położenie urządzenia:	Wolnostojący
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	220-240 V
Wysokość produktu:	1670 mm
Szerokość produktu:	595 mm
Głębokość produktu:	645 mm
Waga produktu:	52000 g
Szerokość opakowania:	640 mm
Wysokość opakowania:	1735 mm
Głębokość opakowania:	725 mm
Okres gwarancji:	2 lat(a)
Głębokość przy otwartych drzwiach:	1305 mm
Poziom hałasu:	38 dB
Klasa emisji hałasu:	C
Prąd:	1.5 A
Obciążenie:	100 W
Klasa wydajności energetycznej:	E
Skala efektywności energetycznej:	Od A do G
Zawias drzwiczek:	Prawy
Waga wraz z opakowaniem:	53889 g
Typ lamp:	LED
Roczne zużycie energii:	113 kWh
Dwustronne drzwi:	Tak
Pojemność lodówki netto:	322 l
Tworzywo półek:	Szkło
Światło wewnątrz lodówki:	Tak
Automatyczne rozmrażanie (lodówka):	Nie
Liczba półek w lodówce:	5
Liczba pojemników na warzywa:	1
Przegródki na drzwiach lodówki:	4
Stojak na butelki:	Tak
Funkcja Super Cool:	Tak
Komora Fresh zone:	Nie
Alarm przy otwiertych drzwiach:	Nie
Tryb klimatu:	SN-T
Pojemnik na jajka:	Tak
Liczba kompresorów:	1
Funkcja urlopu:	Nie
System nie zamrażania:	Nie
Dozownik wody:	Tak
System przepływu powietrza:	Nie
System chłodzenia:	Wentylowane
Wentylacja:	Tak
Wpuszczany uchwyt(y):	Nie
Liczba drzwi:	1 drzw.
Komora antybakteryjna:	Nie
Sterowanie elektroniczne:	Tak