Instrukcja obsługi Intellinet 508995

Intellinet przełącznik 508995

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intellinet 508995 (16 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 3.9 gwiazdek

Pobierz PDF

Strona 1/16

Scan to

product warranty

Important: Read before use. • Importante: Leer antes de usar.

Industrial 4-Port

Gigabit Ethernet

PoE++ Switch with 2

SFP Ports Instructions

Model 508995 (IIS-4G02POE-240W)

For additional benets:

or go to: register.intellinet-network.com/r/508995

The Intellinet Industrial 4-Port Gigabit Ethernet PoE++ Switch with 2 SFP Ports offers

an array of time-saving, cost-effective features while providing superior network

throughput. No configuration is required and installation is plug and play.

Features

• Provides power and data connections for up to four PoE network devices

• IP40 slim-type metal housing to withstand harsh industrial conditions

• Wide operating temperature: -20 – 75°C (4 – 167°F)

• Option for DIN-rail installation

• Two small form-factor pluggable GBIC module slots (SFP)

• Two redundant DC inputs (48 - 57 V) with I/O terminal block

With a backplane speed of 12 Gbps, plenty of performance is available for your

computers, servers and other networking devices. Each of the ports automatically

senses the link speed of the connected network device and adjusts to 10, 100 or

1000 Mbps for compatibility and maximum performance. This PoE switch is designed

to provide compatible devices with enough power when needed. It offers up to

95 watts of power per port until its power budget of 240 watts is reached.

For specifications, visit . Register your product at intellinetnetwork.com register.

intellinet-network.com/r/508995 or scan the QR code on the cover.

Placement

Desktop Installation

Prior to use, place/position the switch:

• on a level surface that can support the weight of the switch and that

offers at least 25 mm (approx. 1”) of clearance for ventilation;

• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;

• within 100 m (approx. 328’) of network devices it’s to be connected to.

DIN-Rail Installation

1 With DIN-rail bracket attached to device with screws, angle bracket onto DIN rail.

2 Push device in till it clicks into place.

1 2

English

Instructions

Power

Chassis Ground Column

Located on the side of the power supply connector, a grounding terminal

connector is used to provide proper grounding for your Intellinet Network

Solutions switch. It should be wired to an object that provides earth ground.

Terminal Block Installation

NOTE: Ensure all power is off/disconnected before beginning!

1 Loosen appropriate screws.

2 Insert bare power-supply wires into appropriate terminals (positive wire

into positive terminal; negative wire into negative terminal).

3 Tighten appropriate screws to secure wires. (If desired, repeat steps 1 – 3 on second input pair.)

4 Install block into the device and tighten screws.

Front Panel

LED Color Status Status Description

PWR Green On Power on

Off Power off

Link 1 – 4 Yellow On Valid port connection

Blinking Sending or receiving data

SFP 1 & 2 Green Off No link established.

PoE 1 – 4 Green On The connected Powered Device (PD) is receiving power.

Off No PD is linked.

Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn’t indicate

a link or activity, check the corresponding device for proper setup and operation.

P2P1

Instructions

English

Specyfikacje produktu

Marka:	Intellinet
Kategoria:	przełącznik
Model:	508995
Kolor produktu:	Drewno
Waga produktu:	3300 g
Wyjścia słuchawkowe:	1
Wtyk słuchawek:	3,5 mm
Zakresy tunera:	AM,FM
Model:	Gramofon z napędem pasowym
Typ zasilacza:	Prąd przemienny
Wejście AUX:	Tak
Prędkość nominalna:	33,45,78 RPM
Wyjścia linii RCA:	1
Wymiary produktu (SxWxG):	320 x 270 x 120 mm