Instrukcja obsługi Intermatic FM1D14A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intermatic FM1D14A (2 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 3 użytkowników na średnio 4.5 gwiazdek

Specifications

Input

12VDC-24 VAC/VDC, 50/60 Hz (FM1D14-LV)

120-277 VAC, 50/60 Hz (FM1D14-AV)

Output

NO Contact

General Purpose: 15 A, 277 VAC

Tungsten: 1000 W, 120 VAC

Ballast : 8 A, 277 VAC

Pilot Duty: B300

Electronic Ballast: 4.9 A, 120 VAC

Motor: 10 FLA, 60 LRA @ 250 VAC; ½ HP,

120 VAC; 1 HP, 250 VAC

NC Contact

General Purpose: 15 A, 277 VAC

Resistive: 12 A, 24 VDC

Ballast : 8 A, 120 VAC

Motor: 10 FLA, 60 LRA @ 250 VAC; ½ HP,

120/240 VAC

Operating Temperature: 5˚ F to 135˚ F (-15˚ C to 55˚ C)

Carry-over: 2500 hours fully charged

Description

This manual provides installation and

programming instructions for the FM1D14

series timer.

Timer

Day

h+m+

+1h

OVR

Reset

Figure 1. FM1D14 Timer

1.26 in.

[32 mm]

.14 in

[3.56 mm]

1234

5

2.36 in.

[60 mm]

.14 in

[3.56 mm]

2.36 in.

[60 mm]

2.13 in.

[54 mm]

Figure 3. Connect FM1D14 Wiring (Front View Shown).

COMNCNO

M

1

2

34

5

LOAD

12 VDC

(+)(-)

Typical Wiring (12 VDC Application)

COMNCNO

M

1

2

34

5

LOAD

24 VDC

(+)(-)

Typical Wiring (24 VDC Application)

COMNCNO

1

2

34

5

LOAD

24-277

VAC

L1L2/N

Typical Wiring (24-277 VAC Application)

COMNCNO

M

1

2

34

5

L1L2/N

NO

(Dry Contact)

NC

(Dry Contact)

M

+

-

+

-

FM1D14 Series 24-Hour/7-Day Time Switch Operation and User Instructions

• Disconnect power prior to installation.

• Connect FM1D14 wiring in accordance with all applicable national and local

electrical code requirements.

Risk of Fire or Electric Shock

WARNING

Setting the Time of Day

Follow this procedure to set the time of day and day of the week.

1. Press and release the button with a blunt object to reset the unit. Reset

The timer screen ashes.

2. Press and hold and h+ simultaneously to access the 12:00 AM

screen.

3. Take one of these actions.

If…Then…

Your time zone currently is in

Daylight Saving Time,

Press the +1h button.

Go to step 4.

Your time zone is not in

Daylight Saving Time,

Go to step 4 to set the

current time.

4. Press and hold and press repeatedly until you advance to the h+

current hour.

5. Press and hold and press repeatedly until you advance to the m+

current minute.

6. Press and hold and press repeatedly until you advance to the Day

current day.

Programming Events

To set ON/OFF event pair, set ON event and

then repeat procedure to set OFF event.

The timer enables up to 7 ON/OFF event

pairs.

1. Press the button. Dashed lines Timer

appear to indicate no event is set for

event 1.

2. Press to select the days of the week for the ON event. Day

NOTE: To set the ON event:

ON a Specic DaySelect: The desired day

Every Day of WeekSelect: MO, TU, WE, TH, FR,

SA, SU

Every Weekday:Select: MO, TU, WE, TH, FR

Every Weekend:Select: SA, SU

Monday through SaturdaySelect: MO through SAT

Monday, Wednesday, FridaySelect: MO, WE, FR

MO

TUWETH

FRSASU

ON

Figure 2. FM1D14 Timer Dimensions

Mounting the FM1D14 Series Timer

The standard FM1D14 timer can be surface mounted inside a panel or ush

mounted. Mount the timer as required. Refer to the dimension drawing in

Figure 2.

Connecting the FM1D14 Series Timer Wiring

Follow this procedure to connect the FM1D14 timer wiring.

1. Make sure supply power is disconnected.

2. Check input and output ratings marked on timer to verify the product is

suitable for your supply voltage, load, and application.

3. Connect the FM1D14 wiring. See Figure 3 for reference.

Specyfikacje produktu