Instrukcja obsługi Kicker L7S84
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kicker L7S84 (21 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 3.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/21
Owner’s Manual | English
Manual del Propietario | Español
SOLO-BARIC ALTAVOZ PARA SONIDOS GRAVES
Benutzerhandbuch | Deutsch
SOLO-BARIC TIEFTÖNER
Manuel d’utilisation | Française
SOLO-BARIC HAUT-PARLEUR D’EXTRÊMES GRAVES
SOLO-BARIC® SUBWOOFER
L7S8 | L7S10 | L7S12 | L7S15
2
SPECIFICATIONS
WIRING
Solo-Baric L7 subwoofers are available with dual 2 (ohm) or dual 4 voice coils. Both coils must be
connected to a source of amplifi cation. The dual 2 woofer will generate a 1 load if the coils are wired in
parallel or a 4 load in series. The dual 4 woofer will provide a 2 load wired in parallel or 8 load wired
in series. The terminals with the white dots are for the fi rst voice coil. The terminals with solid-red and
solid-black markings are for the second voice coil. See Figure 1.
SOLO-BARIC L7 SUBWOOFER
OWNER’S MANUAL
Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
Speaker Serial Number:
Model L7S8 L7S10 L7S12 L7S15
Rated Impedance [Ω] 2 or 4 2 or 4 2 or 4 2 or 4
Fs [Hz] 47.2 37.5 34 26.3
Continuous Power Handling [Watts RMS] 450 600 750 1000
Sensitivity [1W, 1m] 82.37 85.87 86.90 88.56
Xmax (Linear Excursion) [mm] .52 (13.5) .64 (16.25) .64 (16.25) .75 (19)
Re [Ω] 6.6 7.9 6.8 7.0
Qms 8.828 9.791 9.488 11.868
Qes .802 .535 .571 .565
Qts .735 .507 .539 .539
Vas [ft³, L] .322 (9.127) 1.0 (28.347) 1.916 (54.274) 5.263 (149.048)
Outer Frame Dimension [in, cm] 8-3/16 (22.4) 10-11/16 (27.1) 12-5/8 (32) 15-5/8 (39.7)
Mounting Cutout [in, cm] 7-1/4 (18.4) 9-5/16 (23.7) 11-1/16 (28.1) 13-3/4 (34.9)
Mounting Depth [in, cm] 4-3/4 (12.1) 6-1/4 (15.9) 6 13/16 (17.3) 8 11/16 (22.1)
Frequency Response [Hz] 28–500 24–500 20–500 18–500
L7S8 / L7S10 / L7S12 / L7S15Models:
Note: All specifi cations and performance fi gures are subject to change. Please visit www.kicker.com for the most
current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine KICKER
Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum performance.
Sound Check: Poor bass response? Check the system phasing by reversing the positive and negative
speaker connections on the subwoofer. If the bass improves, then the subwoofer was out of phase in
reference to the rest of the audio system.
WARNING: KICKER products are capable of producing sound levels that can permanently damage your
hearing! Turning up a system to a level that has audible distortion is more damaging to your ears than
listening to an undistorted system at the same volume level. The threshold of pain is always an indicator
that the sound level is too loud and may permanently damage your hearing. Please use common sense
when controlling volume.
3
BOX BUILDING NOTES
Use 3/4” (1.9cm) or thicker MDF (medium density fi berboard) and seal the joints with silicone. Use the
“template” inside your Solo-Baric’s shipping carton to mark the mounting hole, then cut directly on the
line. These designs need internal bracing. Add triangular bracing between each of the larger unsupported
panels. See Figure 3.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the vented
enclosures the displacement of the port must be calculated and added to the internal volume of the fi nal
design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for example
the L7S12 vented Minimum design’s external port dimensions are, using 3/4” (1.9cm) MDF: [ (13.25” +
1.5” total MDF wall thickness) x (2.5” + 1.5” total MDF wall thickness) x 22.5”] x (1 ft
3 / 1728 in3 ) = .77
ft3, and add this number to the internal volume of the enclosure, L7S12’s 1.75 ft
3 + .77 ft3 = 2.52 ft3. See
Figure 4. Due to the necessary length of these ports, you may want to fold the port along the bottom and
back walls. It will be impractical to use round ports for these designs.
Figure 1 Series Wiring
Parallel Wiring
Figure 2
Cutout Dimensions
Dual 2Ω Voice Coils = 4Ω Load
Dual 4Ω Voice Coils = 8Ω Load
Dual 2Ω Voice Coils = 1Ω Load
Dual 4Ω Voice Coils = 2Ω Load
L7S8
L7S10
L7S12
L7S15
13 3/4”
(34.9 cm)
11 1/16”
(28.1 cm)
9 5/16”
(23.7 cm)
7 1/4”
(18.4 cm)
13 3/4”
(34.9 cm)
11 1/16”
(28.1 cm)
9 5/16”
(23.7 cm)
7 1/4”
(18.4 cm)
Corner Radius:
L7S8 - 1.5” (38.1mm)
L7S10 - 1.5” (38.1mm)
L7S12 - 1.75” (44.5mm)
L7S15 - 1.7” (43.2mm)
coil 1 coil 1+ +
coil 2 coil 2+ +
amplifi er +amplifi er +
amplifi er -
amplifi er -
coil 2 coil 2- -
coil 1 coil 1- -
Specyfikacje produktu
| Marka: | Kicker |
| Kategoria: | subwoofer |
| Model: | L7S84 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Kicker L7S84, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje subwoofer Kicker
13 Stycznia 2025
13 Stycznia 2025
12 Stycznia 2025
10 Stycznia 2025
10 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
9 Października 2024
9 Października 2024
9 Października 2024
Instrukcje subwoofer
- subwoofer Renegade
- subwoofer Energy
- subwoofer Jensen
- subwoofer Tangent
- subwoofer Roland
- subwoofer Argon
- subwoofer Alphasonik
- subwoofer Revel
- subwoofer Triangle
- subwoofer Apart
- subwoofer Cerwin-Vega
- subwoofer Hifonics
- subwoofer Martin Logan
- subwoofer LD Systems
- subwoofer Sharp
Najnowsze instrukcje dla subwoofer
4 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
19 Marca 2025
19 Marca 2025
19 Marca 2025
19 Marca 2025
19 Marca 2025