Instrukcja obsługi King WR230-B-KIT
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla King WR230-B-KIT (4 stron) w kategorii termostat. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
Page 1
This thermostat is designed to reinforce positive energy habits while limiting landlord energy expenses. For use on 120 Volt AC and a total of 16 Amps
load inductive Continuous.
Check the voltage to make sure you have the right thermostat for your heater voltage. A 1-pole or single-wide breaker indicates a 12 Volt circuit.
Be safe and smart! Electricity can cause severe injury or death if not treated with respect and caution.
This thermostat will provide years of comfort control for your family in use with small fan driven electric heaters, baseboards, radiant ceiling, wall panel
heaters, cove heaters or any line voltage resistance heating systems that do not have an electric motor over 1/3 hp.
OPERATION:
The is a precision electronic thermostat and uses a very sensitive thermistor near the bottom to sense room air
temperature, sending the information on the microprocessor. As the temperature drops, the information sent will indicate if heat is needed.
This saves energy and provides the best temperature control of an area.
The thermostat has an extra contact terminal block for remote set back to 40°F/5°C. Intended for window or door open
contacts. The 40°F/5°C temperature is a fixed setting and not adjustable. The maximum operating temperature is stopped at 74°F/23°C, helping to
change human behaviors that increase energy costs.
INSTALLATION:
This line voltage device should be installed and serviced by a qualified electrician. The thermostat has been designed to mount to a standard
2” x 4” elctrical outlet box. Leveling of the thermostat is not required. #6-32 Phillips head mounting screws are provided.
Mount the thermostat in an open area about 5 feet above the floor, avoiding outside walls as they are too cold and will inhibit the thermostats
performance. A general rule of thumb is to place the thermostat above the wall switch for that room. This works well for most bedrooms, making
it very convenient to turn the heat lower upon leaving. Avoid mounting the thermostat where there may be plumbing pipes in the wall or placing
a lamp or TV too close to the thermostat. Heat from such items negatively affect thethermostats performance.
SPECIFICATIONS:
Temperature range: 40°F/5°C to 74°F/23°C
Temperature Default: Your set point 60°F/16°C
to 40°F/5°C
Display Format: Liquid Crystal Display (LCD)
Display size: Large Format
Sample Rate: Every 60 seconds
Heat indicator: LCD “heater on”
Window Contacts OPEN. (LCD) OPN
Relay Rating: 16 Amps inductive or resistive
Accuracy: ± 0.9°F/±0.5°C
Maximum Amps: 16 inductive continuos
Maximum Watts: 1875 @ 120V
3328 @ 208V
3840 @ 240V
Total inductive motor load combined can not exceed
16 amps
Minimum Watts:0
Power Supply Rated 208/240 VAC
Operating Range 200 to 250 VAC
Specyfikacje produktu
| Marka: | King |
| Kategoria: | termostat |
| Model: | WR230-B-KIT |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z King WR230-B-KIT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje termostat King
25 Września 2024
25 Września 2024
16 Września 2024
8 Września 2024
3 Września 2024
3 Września 2024
31 Sierpnia 2024
29 Sierpnia 2024
28 Sierpnia 2024
26 Sierpnia 2024
Instrukcje termostat
- Radson
- Thermy
- Bryant
- Westfalia
- Max
- Warmup
- Webasto
- Devolo
- MundoControl
- BTicino
- Tesla
- IMIT
- Cotech
- Oventrop
- H-Tronic
Najnowsze instrukcje dla termostat
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
6 Kwietnia 2025
6 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025