Instrukcja obsługi Kodak Ngenuity 9125
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kodak Ngenuity 9125 (7 stron) w kategorii skaner. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 10 użytkowników na średnio 4.3 gwiazdek
Strona 1/7
OVERVIEW 1-1
INSTALLATION 2-1
GETTING STARTED 3-1
CONTROL PANEL AND NGENUITY OPERATOR UTILITY 4-1
ADVANCED FEATURES 5-1
MAINTENANCE 6-1
TROUBLESHOOTING 7-1
APPENDICES A-E
Safety
User Precautions
• Place the scanner on a sturdy, level work surface capable of supporting 50.8 kg (112 lbs) and leave adequate clearance on
all sides of the scanner.
• When relocating the scanner, it is recommended that two people lift the scanner and use safe lifting techniques.
• Do not install the scanner in a location subject to dust, humidity or steam. This may cause electrical shock or a fire. Only use
the scanner indoors in a dry location.
• Make sure the electrical power outlet is located within 1.52 meters (5 feet) of the scanner and is easily accessible.
• When disconnecting equipment from the electric socket, be sure to grasp the plug, not the cord.
• Be sure the power cord is securely plugged into the wall outlet. Failure to do so may cause electrical shock or fire.
• Do not damage, knot, cut or modify the power cord or use a damaged power cord. This may cause electrical shock or fire.
• The scanner requires a dedicated and properly grounded power outlet. Do not use an extension cord or power strip with the
scanner.
• Do not leave the power cord plugged into the AC outlet if the scanner is not used for an extended period of time.
• Leave sufficient space around the power outlet so it can be easily unplugged in case of an emergency.
• Do not use the scanner if it becomes inordinately hot, has a strange odor, emits smoke, or makes unfamiliar noises.
Immediately stop the scanner and disconnect the power cord from the power outlet. Contact Kodak Service.
• Do not disassemble, service or modify the scanner except as explained in the User’s Guide.
• Do not move the scanner with the power cord and interface cable attached. This may cause damage to the cord/cable.
Remove the power cord from the wall outlet before moving or relocating the scanner.
• Follow the Kodak recommended cleaning procedures. Do not use air, liquid or gas spray cleaners. These cleaners displace
dust, dirt and debris to other locations within the scanner, which may cause the scanner to malfunction.
• Material Safety Data Sheets (MSDS) for chemical products are available on the Kodak website at: www.kodak.com/go/msds.
When accessing the MSDSs from the website, you will be required to provide the catalog number or keyword of the
consumable you want the Material Safety Data Sheet for. See the section entitled, “Supplies and consumables” later in this
guide for supplies and catalog numbers.
Users and their employers need to observe the common sense precautions applicable to the operation of any machinery. These
include, but are not limited to, the following:
• Do not wear loose clothing, unbuttoned sleeves, neckties, etc.
• Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.
• Hair length should be kept short, using a hair net if needed, or tying long hair up in a bundle.
• Remove all other loose objects from the area that could be drawn into the machine.
• Take sufficient breaks to maintain mental alertness.
• Use only the recommended cleaning supplies.
• Do not use canned/compressed air.
Supervisors should review their employee practices and make compliance with these precautions a part of the job description
for operation of the scanner or any mechanical device.
Specyfikacje produktu
| Marka: | Kodak |
| Kategoria: | skaner |
| Model: | Ngenuity 9125 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Kodak Ngenuity 9125, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje skaner Kodak
22 Lutego 2025
6 Października 2024
1 Października 2024
9 Września 2024
8 Września 2024
5 Września 2024
5 Września 2024
5 Września 2024
30 Sierpnia 2024
29 Sierpnia 2024
Instrukcje skaner
- skaner Rittz
- skaner Braun
- skaner ION
- skaner Konica Minolta
- skaner Kenko
- skaner Dyka
- skaner Cartrend
- skaner Steren
- skaner Kensington
- skaner Dymo
- skaner Tevion
- skaner Kogan
- skaner Zolid
- skaner Minolta
- skaner DENSO
Najnowsze instrukcje dla skaner
29 Marca 2025
19 Lutego 2025
28 Stycznia 2025
16 Stycznia 2025
12 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025
29 Grudnia 2024
22 Grudnia 2024
14 Grudnia 2024