Instrukcja obsługi Kramer SID-DP

Kramer przedłużacz AV SID-DP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kramer SID-DP (2 stron) w kategorii przedłużacz AV. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/2

The Kramer SID- DisplayPort Step-In Commander DP

Congratulations on purchasing your Kramer DigiTOOLS

® SID-DP DisplayPort Step-In

Commander which is ideal for boardrooms and presentation rooms.

The Kramer is an HDCP compliant DisplayPort and unbalanced stereo audio SID-DP

remote device that used to remotely take control of a compatible switcher, for is

example, the Kramer . The commander does not need a power adapter if VP-81SID

located within 50m ( ft) of the switcher. 164

Figure 1 Table 1 and deﬁne the . SID- DP DisplayPort Step-In Commander

Figure 1 SID- DisplayPort Step-In Commander Front and Rear Panel : DP

Table 1 SID- DisplayPort Step-In Commander Front and Rear Panel Features : DP

Feature

Function

AUDIO INPUT 3.5mm Mini Jack

Connect to the unbalanced stereo audio source

DP INPUT DisplayPort Connector

Connect to the video source DP

STEP Button IN

Press to switch the input to this remote control commander The .

button lights when active

ON LED

Lights green when the unit receives power

LINE OUT Twisted Pair RJ-45

Connector

Connect to the TP input of compatible switcher (for example, the a

VP-81SID) using CAT 6 or higher specification cable

Remote Switch Terminal Block

Connections (pins 2 and 3)

Connect to the remote step-in switch

12V DC Power Connector

Connect to the power adapter

Remote LED Terminal Block

Connections (pins 1 and 2)

Connect to the remote LED (observe correct polarity, pin 1 to the

LED anode and pin 3 to the cathode)

Figure 2 illustrates how to connect the to a source switcher, and remote switch SID-DP ,

and LED.

Figure 2 SID- Wiring Connections : DP

To connect the SID- as illustrated in : DP Figure 2

1. Connect the DP video source (for example, a laptop graphics source to the )

DisplayPort connector on the front panel of the . SID-DP

2. Connect the unbalanced stereo audio source (for example, a laptop graphics source)

to the 3.5mm mini jack AUDIO INPUT connector on the front of the SID-DP.

3. Using STP cable, connect the LINE OUT RJ- TP connector on the rear panel of 45

the to the required input on the rear panel of the (up to 50m SID-DP VP-81SID

away).

4. Optional Connect the terminal block on the rear of the to the remote —S -ID DP

switch and LED.

Note: The LED supply includes a current limiting resistor and is designed to work

with any standard LED.

5. Connect the power adapter to the 12V DC connector on the rear of the and SID-DP

to the mains electricity (if the distance exceeds 50m ( ft) from the switcher). 164

Specyfikacje produktu

Marka:	Kramer
Kategoria:	przedłużacz AV
Model:	SID-DP
Kolor produktu:	Wielobarwny
Napięcie wejściowe AC:	12 V
Waga produktu:	300 g
Długość kabla:	5 m
Gniazdko wyjścia DC:	Tak
Model:	Nadajnik AV
Standardowe rozwiązania komunikacyjne:	ISDN
Wymiary produktu (SxGxW):	120 x 70 x 24 mm
Maks. rozdzielczość:	- px
Wejście audio:	1
Materiały:	Metal,PVC
Złącze(a):	2
Długość produktu:	5000 mm
Liczba połączeń (wewnętrznych/zewnętrznych):	1
Złączka 2:	RJ-45
Złączka 1:	RJ-45
Złącze 1:	Męska
Złącze 2:	Męska
Obsługiwane typy kabli:	Cat6, Cat7
Wyjścia RJ-45:	1
Materiał płaszcza:	Polichlorek winylu (PVC)
Izolacja kabla:	U/UTP (UTP)