Instrukcja obsługi Kramer VM-4H2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kramer VM-4H2 (17 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 5.0 gwiazdek
Strona 1/17
P/N: 2900-300565 Rev 3 www.kramerAV.com
USER MANUAL
MODEL:
VM-4H2
4K HDMI 2.0 1:4 DA
Kramer Electronics Ltd.
VM-4H2 Contents –
i
Contents
Introduction 1
Getting Started 1
Overview 3
Typical Applications 3
Dening the VM-4H2 4K HDMI 2.0 1:4 DA 4
Setting the DIP-Switches 4
LED Indications 5
Mounting VM-4H2 6
Connecting the VM-4H2 7
EDID Acquisition Policy 8
Upgrading the Firmware 9
Supported Input Resolutions 10
Default EDID 11
Technical Specications 13
Kramer Electronics Ltd.
VM-4H2 Introduction –
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world
of unique, creative, and aordable solutions to the vast range of problems that confront video,
audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better!
Getting Started
We recommend that you:
• Unpack the equipment carefully and save the original box and packaging materials for
possible future shipment.
• Review the contents of this user manual.
Go to www.kramerav.com/downloads/VM-4H2 to check for up- -date user manuals, to
application programs, and to check if rmware upgrades are available (where appropriate).
Achieving Best Performance
• Use only good quality connection cables (we recommend Kramer high-performance,
high-resolution cables) to avoid interference, deterioration in signal quality due to poor
matching, and elevated noise levels (often associated with low quality cables).
• Do not secure the cables in tight bundles or roll the slack into tight coils.
• Avoid interference from neighboring electrical appliances that may adversely inuence
signal quality.
• Position your Kramer away from moisture, excessive sunlight and dust. VM-4H2
Safety Instructions
Caution:
• This equipment is to be used only inside a building. It may only be connected to other
equipment that is installed inside a building.
• For products with relay terminals and GPI\O ports, please refer to the permitted rating
for an external connection, located next to the terminal or in the User Manual.
• There are no operator serviceable parts inside the unit.
Warning:
• Use only the power cord that is supplied with the unit.
• Disconnect the power and unplug the unit from the wall before installing.
• Do not open the unit. High voltages can cause electrical shock! Servicing by qualied
personnel only.
• To ensure continuous risk protection, replace fuses only according to the rating
specied on the product label which located on the bottom of the unit.
Specyfikacje produktu
| Marka: | Kramer |
| Kategoria: | odbiornik |
| Model: | VM-4H2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Kramer VM-4H2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje odbiornik Kramer
3 Stycznia 2025
19 Grudnia 2024
19 Grudnia 2024
19 Grudnia 2024
19 Grudnia 2024
19 Grudnia 2024
19 Grudnia 2024
19 Grudnia 2024
19 Grudnia 2024
19 Grudnia 2024
Instrukcje odbiornik
- odbiornik Pyramid
- odbiornik Alfatron
- odbiornik Chord
- odbiornik Citronic
- odbiornik Jensen
- odbiornik Infinity
- odbiornik Alecto
- odbiornik Viscount
- odbiornik Artsound
- odbiornik Wharfedale
- odbiornik CAD Audio
- odbiornik Edwards Signaling
- odbiornik TV One
- odbiornik Sony
- odbiornik Naxa
Najnowsze instrukcje dla odbiornik
9 Kwietnia 2025
9 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
30 Marca 2025