Instrukcja obsługi La Crosse Technology 75904

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla La Crosse Technology 75904 (2 stron) w kategorii Radiobudzik. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 3 użytkowników na średnio 4.5 gwiazdek

Page 3Page 2

For more information and support visit: http://bit.ly/75904_alarm

JUMBO BLUE LED

ALARM CLOCK

WITH USB PORT

ALARM

USB

TIMEMINUTE HOUR

PM

ALARM

PM Indicator

Alarm Indicator

Dimmer Switch

1 Amp USB

Charging Port

Alarm

Time

Time Display

Snooze

Alarm

ON/OFF

Switch

Back Up Battery

Compartment

Hour

Minute

MODEL: 75904

DC: 031220

POWER UP

1. Insert the 120 volt power cord into an outlet.

Optional: Insert 1 “9V” battery (not included) for backup.

2. The Time Display will show 12:00.

TIME SETTING

Continuously hold down the TIME button while setting your hour

and minutes.

1. While holding the TIME button, press the HOUR button to set your hour.

Note: The PM Indicator will appear when you advance to PM time.

2. While holding the TIME button, press the MINUTE button to set

your minutes.

3. When the correct time is shown on the display, release the

TIME button.

ALARM TIME SETTING & OPERATION

Continuously hold down the ALARM button while setting your alarm

hour and minutes.

1. While holding the ALARM button, press the HOUR button to set your

alarm hour. The PM Indicator will appear when you advance Note:

to PM time.

2. While holding the ALARM button, press the MINUTE button to set

your alarm minutes.

3. When the correct alarm time is shown on the display, release the

ALARM button.

4. Move the Alarm ON/OFF Switch to the ON position to turn the alarm

on. The ALARM Indicator will appear when the alarm is on.Note:

5. To turn o a sounding alarm, move the Alarm ON/OFF Switch to

the OFF position.

S N O O Z E

When alarm sounds (beeps), press the SNOOZE button to silence alarm

for 8minutes. Snooze function can be repeated many times if desired.

DISPLAY BRIGHTNESS

Use the Dimmer Switch on the side of the clock to adjust your LED

brightness, HI or LO.

USB CHARGING PORT

Connect your external device’s USB charging cable (not included)

to the USB Charging Port.

Notes:

• Charging times will vary.

• USB Power Output:

1 Amp maximum current.

• Charge 1 Amp devices or

devices that are self-regulating.

• This is a power-output charging

port. It does not provide power

to the alarm clock.

BATTERY BACKUP

• Insert 1 “9V” battery (not included) into the Battery Compartment on the

back of the clock. This will keep your time and alarm settings saved until

power is restored.

• The LED display will not light-up, but the alarm will still sound at the

preset alarm time.

Note: If there is no battery installed and the power is interrupted, the

display will show 12:00 and the time and/or alarm will need to be

set again.

POWER REQUIREMENTS & DIMENSIONS

Power: 120V Power Cord

The plug on the power adapter is intended to serve as the disconnect device, the

socket-outlet shall be installed near the equipment and shall be easily accessible.

Battery Backup: “9V” battery (not included)

Dimensions: 7.25" L x 2.00" W x 3.90" H (18.42 cm L x 5.08 cm W x 9.91 cm H)

ALARM

USB

TIMEMINUTE HOUR

*Phone & USB Cord are not included.

Specyfikacje produktu