Instrukcja obsługi Lorex LDC6080B

Lorex kamera bezpieczeństwa LDC6080B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lorex LDC6080B (2 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 3.5 użytkowników na średnio 4.9 gwiazdek

Pobierz PDF

Strona 1/2

QUICK START GUIDE

www.lorextechnology.com

Lorex Technologies Inc.

As our products are subject to continuous improvement, Lorex reserves the right to modify product

design, specifications and prices, without notice and without incurring any obligation. E&OE

Cable Extension Options SUPER RESOLUTION IR

VANDAL DOME

CAMERA

Problem Solution

No Picture/Signal • Ensure your TV is on the correct input

channel. Common terms of an input channel:

INPUT, AV CHANNEL, LINE1, LINE2, AUX.

• If your camera is connected to a VCR/DVR,

ensure it is properly connected to your TV/

Monitor.

• Ensure connections are properly connected.

• Ensure all the camera power supply is

plugged in.

Picture is too bright • Ensure your camera isn’t pointed directly at a

source of light (e.g sun or spot light).

• Slide the sunshade (bullet cameras only)

forward to block excess light.

• Move your camera to a different location.

Picture is too dark • If using during the day, the camera may not

be getting enough light. Slide the sunshade

backwards to let in more light. Check the

brightness and contrast settings of the device

your camera connects to (TV/Monitor/DVR).

Night Vision is not

working

• The night vision activates when light levels

drop. The area may have too much light.

Picture is not clear • Check the camera lens for dirt, dust,

spiderwebs. Clean the lens with a soft, clean

cloth.

• Make sure that the cable run is within the

limitations specified in the section ' Cable

Extension Options'

Bright spot in video

when viewing camera

at night

• Night vision reflects when pointing a camera

to a window. Move the camera to a different

location.

BNC connection does

not connect to my TV

• Use a BNC to RCA adapter at the end of the

extension cable.

Troubleshooting

Option Cable Type

1Regular BNC

(supplied with

camera)

180ft / 55m 3

2'RG59' or 'Coax'

or ' Coaxial'

BNC (sold sepa-

rately)

300ft / 92m 5

3Lorex Universal

Cable

(sold separately)

300ft / 92m 3

Max. Cable

Run Distance

Max. # of

Extensions

MODEL: LDC6080 SERIES

English Version 1.0

Image Sensor 1/3" Sony Super HAD™ II

Video Format / Pixels

Horizontal Resolution

Video Output

IR / Night Vision Range

Field of View (diagonal)

Minimum Illumination

Termination

NTSC: 768(H)×494(V)

600 TVL

Comp. 1.0 Vpp @ 75ohm

39 - 93 Degrees

0 LUX (IR LEDs on)

Video: BNC Female

Power: Barrel Female

Lens / Lens Mount 4~9mm F1.6~2.4 / Varifocal

Camera Specifications

Notes:

1. For optimal performance, consider using option 2 or 3. Preference for using

the same cable type for the entire distance.

2. Cable run recommendation based on typical camera power consumption (up

to 500mA). For specialty cameras with higher current consumption,

maximum cable run may be reduced. Consider providing power to the camera

at the camera side rather then at the end of the extension cable.

3. Indicators that your cable run may be too long:

• Video is permanently Black & White (even during day time)

• Video is distorted

Product Information

User Manuals

Quick Start Guides

Specification Sheets

Software Upgrades

Firmware Upgrades

www.lorextechnology.com

IT’S ALL ON THE WEB!

Extend the cable run for your camera up to 300ft or more

depending on the cable type used. See table below:

Operating Temperature 14°F ~ 122°F

(-10°C ~ 50°C)

Power Requirement 12V DC ±10%

Power Consumption 500 mA or 6W max

Weight (with stand) 1.6 lbs. / 0.8 kg

35 IR LED/100 ft. (30m)

Environmental Rating IP 66

5.3in/135mm

4 in /

101.6mm

Specyfikacje produktu

Marka:	Lorex
Kategoria:	kamera bezpieczeństwa
Model:	LDC6080B
Obsługa PoE:	Nie
Zakres temperatur (eksploatacja):	-10 - 50 °C
Tryb nocny:	Tak
Wi-Fi:	Nie
Pobór mocy:	6 W
Maksymalny zasięg działania:	30 m
Zasilanie:	12VDC
Maks. rozdzielczość:	768 x 494 px
Zakres kąta nachylenia:	39 - 93 °
Zużycie energii:	500 mA
Stosunek sygnału do szumu:	52 dB
Długość ogniskowa:	4 - 9 mm
Typ przetwornika obrazu:	CCD
Typ diody LED:	Podczerwień
Min. Oświetlenie:	0 lx
System formatu sygnału analogowego:	NTSC
Wielkość czujnika CCD:	1/3 "
Szybkość migawki:	1/60 - 1/100000 s
Ilość diod oświetlenia:	35
Liczba linii telewizyjnych:	600
Długość fal podczerwieni:	850 nm
Stosunek ogniskowej (relatywna apertura):	1.6