Instrukcja obsługi Lorus Z008

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lorus Z008 (2 stron) w kategorii Oglądać. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 3 użytkowników na średnio 4.3 gwiazdek

NREZ008 10-2005

CAL. Z008 (R23 SERIES)

■FEATURES AND SPECIFICATION

1.This watch is a combination quartz watch

with analogue and digital displays, 3 hands

analogue movement.

2.Accuracy at normal temperature: +30

seconds a month.

3.Time keeping mode: hours, minutes, seconds,

month, date, day of week, pm ‚“PM‚”.

4.Alarm Mode: daily alarm.

5.Timer Mode: Measuring unit: 1 secondInput

range: from 1 second to 23:59’59”.

6.Stop watch Mode: Measuring unit 1/100 of

second measuring capacity: 23:59’59”.

7.Normal operating temperature range: 10°C

~ 40°C.

8.Battery type: CR2032, SR626SW

■SETTING THE TIME (ANALOGUE)

(MODE)

1. Pull the crown cut one step, the second hand

will stop.

2. Set the correct time by turning the crown.

3. Push the crown back to the original position.

The watch will start running again.

The analogue indication and digital display of

the time setting can be adjusted separately.

■HOW TO CHANGE DISPLAY MODE

■HOW TO SET NORMAL TIME/CALENDAR

( L C D )

1.While in the normal time mode, press S2

button, the seconds digit starts to flash on

the display because it is selected.

2.Press S3 button to change at selection of setting.

SECONDS

DATE

DAY

12/24-HOUR

FORMAT

MONTH

MINUTES

HOURS

3.Press S1 button to advance the selection. Holding

down S1 button changes the high speed.

4. When the 12-hour format is selected, the

indicator “PM” indicates “p.m.” times. There

is no indicator for “a.m.” times.

5. While the seconds digits are selected

(flashing), press S1 button to reset the

seconds to 00. If you press S1 button while

the seconds count is in the range of 30 to 59,

the seconds are reset to 00 and 1 added to

the minutes. If the seconds count is in the

range of 00 to 29, the minutes count is

unchanged.

6. Press button S2 after complete the setting.

NORMAL TIME

12/24 FORMAT SETTING

BY PRESSING S1

DAY OF WEEK

SETTING BY

PRESSING S1

DATE SETTING BY

PRESSING S1MONTH SETTING BY

PRESSING S1

MINUTE SETTING BY

PRESSING S1

HOUR SETTING BY

PRESSING S1

SECOND SETTING BY

PRESSING S1

■HOW TO USE STOPWATCH

From normal time mode, press S3 button once,

you are now in the chronograph mode.

First Usage:

1.Press S1 alternately to start and stop the

chronograph.

2.Press S2 to reset the chronograph to zero.

Second Usage:

1.Press S1 to start, “” flash and the “day of

week” start to roll to the right.

2.Press S2, “day of week” stop rolling, “”

keeps flashing, the chronograph keeps

counting the time and first time split T1 (0 to

T1) shows.

3.Press S2 again, “day of week” keep rolling

and chronograph shows the counting time.

4.Further press S2, “day of week” stop rolling,

“” keeps flashing, the second split time T2

(0 TO T2) shows. This operation can be

repeated and the splits time can be read: 0

to T3, 0 to T4 etc.

5.Press S1 to stop the time counting of the

chronograph. “Day of week” sign

disappears and “” stop flashing.

6.Press S2, the last split time Tn (0 to Tn) shows.

7.Press S2 again, the chronograph is reset to zero.

PM

TR

PM

TR

PM

PM

S3

S3

S3

S2

NORMAL TIME

START

STOPWATCH

LAP

STOP

P

M

S3

S1

S2

S2

S1

■HOW TO SET ALARM TIME

1.You can set alarm with hours and minutes.

When the alarm is on, the alarm (BI-BI) sound

for 20 seconds at the preset time. Press S1,

S2 or S3 to stop the alarm after it starts sound.

2.From the normal time mode, press S3 button

for 2 times into alarm mode.

3.While in the alarm mode, press S2 button to

begin setting procedure. The hour digits

begin flashing.

4.To adjust the flashing digits, press S3 button.

5.To move to minute digits, press S1 button.

T IM ER

NORMAL TIMEC HR O NO G RA PH

A L AR M

SECOND TIME ZONE

TR

AFTERNOON

HO U RS

S 4

DAY OF WEEK

CHIME SIGNAL

CHRONOGRAPH

SIGNAL

DAT E

S 2 (SET)

M INUT E S

S EC O ND S

C RO W N

( L IG H T )

T IM ER

SIGNAL

S 3

S 1 (START/

S T O P)

ALARM SIGNAL

S4

S2

S3

S1

C RO W N

P

M

S3

S3

S3

S3

S3

S3

S3

S3S3

S3

PM

S2

PM

S3

S3

S3

S3

S3

S2

S2

Specyfikacje produktu