Instrukcja obsługi Makita 6013B
Makita
Maszyna do śrub
6013B
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita 6013B (32 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 4.3 gwiazdek
Strona 1/32
GB
Drill Instruction Manual
F
Perceuse Manuel d’Instructions
D
Bohrmaschine Betriebsanleitung
I
Trapano Istruzioni d’Uso
NL
Boormachine Gebruiksaanwijzing
E
Taladro Manual de Instrucciones
P
Berbequim Manual de Instruço˜ es
DK
Boremaskine Brugsanvisning
S
Borrmaskin Bruksanvisning
N
Boremaskin Bruksanvisning
SF
Porakone Käyttöohje
GR ∆Ú˘¿ÓÈ √‰ËÁ›Â˜ ¯Ú‹Ûˆ˜
6013B
6013BR
1 2
3 4
5 6
7
2
ENGLISH Explanation of general view
1Tighten
2Chuck key
3Sleeve
4Ring
5Switch trigger
6Lock button
7Counterclockwise
8Clockwise
9Limit mark
0Brush holder cap
qScrewdriver
SPECIFICATIONS
Model 6013B 6013BR
Drilling capacities
Steel ...................................................................................................... 13 mm 13 mm
Wood .................................................................................................... 36 mm 36 mm
No load speed (RPM) ............................................................................. 550 550
Overall length .......................................................................................... 340 mm 340 mm
Net weight ............................................................................................... 2.8 kg 2.8 kg
•Due to the continuing program of research and
development, the specifications herein are subject
to change without prior notice.
•Note: Specifications may differ from country to
country.
Power supply
The machine should be connected only to a power
supply of the same voltage as indicated on the
nameplate, and can only be operated on single-phase
AC supply. They are double-insulated in accordance
with European Standard and can, therefore, also be
used from sockets without earth wire.
Safety hints
For your own safety, please refer to enclosed Safety
instructions.
These symbols mean:
Read instruction manual.
DOUBLE INSULATION
ADDITIONAL SAFETY RULES
1. Always be sure you have a firm footing. Be
sure no one is below when using the machine
in high locations.
2. Hold the machine firmly.
3. Keep hands away from rotating parts.
4. When drilling into walls, floors or wherever
‘‘live’’ electrical wires may be encountered. DO
NOT TOUCH ANY METAL PARTS OF THE
MACHINE! Hold the machine by the insulated
grasping surfaces to prevent electric shock if
you drill into a ‘‘live’’ wire.
5. Do not leave the machine running. Operate the
machine only when hand-held.
6. Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
OPERATING INSTRUCTIONS
Installing top grip (auxiliary handle) (Fig. 1)
Screw the top grip on the machine securely.
Installing or removing drill bit
Important:
Always be sure that the machine is switched off and
unplugged before installing or removing the bit.
For machines with standard keyed chuck (Fig. 2)
To install the bit, place it in the chuck as far as it will
go. Tighten the chuck by hand. Place the chuck key in
each of the three holes and tighten clockwise. Be sure
to tighten all three chuck holes evenly.
To remove the bit, turn the chuck key counterclock-
wise in just one hole, then loosen the chuck by hand.
After using the chuck key, be sure to return it to the
original position.
For machines with keyless chuck (Fig. 3)
Hold the ring and turn the sleeve counterclockwise to
open the chuck jaws. Place the bit in the chuck as far
as it will go. Hold the ring firmly and turn the sleeve
clockwise to tighten the chuck. To remove the bit, hold
the ring and turn the sleeve counterclockwise.
Switch action
CAUTION:
•Before plugging in the machine, always check to
see that the switch trigger actuates properly and
returns to the ‘‘OFF’’ position when released.
•Change the direction of rotation only after the
machine comes to a complete stop. Changing it
before the machine stops may damage the
machine. (Model 6013BR only)
Model 6013B (Fig. 4)
To start the machine, simply pull the trigger. Release
the trigger to stop. For continuous operation, pull the
trigger and then push in the lock button. To stop the
machine from the locked position, pull the trigger fully,
then release it.
3
Specyfikacje produktu
| Marka: | Makita |
| Kategoria: | Maszyna do śrub |
| Model: | 6013B |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Makita 6013B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do śrub Makita
22 Grudnia 2024
22 Grudnia 2024
22 Grudnia 2024
12 Października 2024
5 Października 2024
4 Października 2024
4 Października 2024
2 Października 2024
1 Października 2024
27 Września 2024
Instrukcje Maszyna do śrub
- Maszyna do śrub Ferm
- Maszyna do śrub Chamberlain
- Maszyna do śrub Ozito
- Maszyna do śrub Alpha Tools
- Maszyna do śrub Metabo
- Maszyna do śrub Power Craft
- Maszyna do śrub Hitachi
- Maszyna do śrub Netter Vibration
- Maszyna do śrub Carrera
- Maszyna do śrub Total
- Maszyna do śrub Wiha
- Maszyna do śrub Cleco
- Maszyna do śrub Porter-Cable
- Maszyna do śrub Senco
- Maszyna do śrub Stanley
Najnowsze instrukcje dla Maszyna do śrub
13 Stycznia 2025
12 Stycznia 2025
11 Stycznia 2025
10 Stycznia 2025
4 Stycznia 2025
4 Stycznia 2025
3 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025