Instrukcja obsługi Netgear WGR614v4

Netgear router WGR614v4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Netgear WGR614v4 (2 stron) w kategorii router. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.7 gwiazdek

Strona 1/2
Installation Guide
Follow these quick steps to install your router.
Before you begin, locate the broadband Internet configuration settings
from your cable company. You can also consult the Install Assistant on the
Resource CD for 54 Mbps Wireless Router.
1
1Connect the Router
a. Turn off your computer and cable or DSL modem.
b. Disconnect the Ethernet cable from your computer (A) which
connects to your cable or DSL modem.
c. Connect the Ethernet cable from your cable or DSL modem to
the nternet po t (A) on theI r WGR614.
d. Connect the Ethernet cable which came with the router from a
Local port on the router (B) to your computer.
e. Turn on the cable or DSL modem and wait about 30 seconds for
the lights to stop blinking.
f. After turning on the modem and waiting for it to synchronize
with the network, turn on the router.
g. Now, turn on your computer. If software usually logs you in to
your Internet connection, do not run that software or cancel it if
it starts automatically.
h. Verify the following:
When you turn the router on, the power light goes on.
If the power light on the router is not lit, check to
make sure the power cord is plugged in and that the
power outlet is turned on if it is controlled by a wall
switch or power strip.
The local lights are lit for any connected computers. If
no local lights are lit, check to make sure the Ethernet
cable is securely connected at the router and at the PC
and that the PC is turned on.
The Internet light is lit, indicating a link has been
established to the cable or DSL modem. If the Internet
light is not lit, check to make sure the Ethernet cable is
securely connected at the router and at the cable or
DSL modem and that the modem is turned on.
Note: For wireless placement and range guidelines, and wireless
configuration instructions, please see the Reference Manual on
the Resource CD for 54 Mbps Wireless Router.
Cable or DSL modem
2
2Log In to the Router
Note: To connect to the router, your computer needs to be
configured to obtain an IP address automatically via DHCP. For
instructions on how to do this, please see Appendix C in the
Reference Manual esource CD for 54 Mbps Wireless Routeron the R.
a. Connect to the router by typing in the addresshttp://192.168.0.1
field of Internet Explorer or Netscape®Navigator.
b. For security reasons, the router has its own user name and
password. When prompted, enter for the router useradmin
name and for the router password, both in lower password
case letters.
Note: The user name and password are not the same as any user
name or password you may use to log in to the Internet.
3
3Connect to the Internet
a. You are now connected to the router. If you do not see the menu
above, click the Smart Wizard link on the upper left of the
main menu.
b. Click Next to follow the steps in the Smart Wizard to input the
router configuration settings. See the green ISP Guide for help
with identifying your ISP settings.
A
54 Mbps Wireless Router v4
54 Mbps Wireless Router
WGR614
Cable or DSL modem
4
A
54 Mbps Wireless Router
WGR614
Cable or DSL modem
B


Specyfikacje produktu

Marka: Netgear
Kategoria: router
Model: WGR614v4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Netgear WGR614v4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą