Instrukcja obsługi Nitecore MH12GT

Nitecore Flesz MH12GT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nitecore MH12GT (1 stron) w kategorii Flesz. Ta instrukcja była pomocna dla 29 osób i została oceniona przez 15 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/1

The All-Round Flashlight Expert

MH12GT

User Manual

Features

• Utilizes a CREE XP-L HI V3 LED

• Maximum output of up to 1000 lumens

• Boasts a peak beam intensity of 25,700cd and a throw distance of up to 320 meters

•Integrated“PrecisionDigitalOpticsTechnology”providesextremereectorperformance

•Higheciencyconstantcurrentcircuitboardprovidesmaxruntimeof520hours

•Asideswitchdesignoersaccessto4brightnesslevelsand3specialmodes,idealforoutdoor

applications

• Integrated power indicator beneath the side switch displays remaining battery power(patented

No. ZL201220057767.4 )

• Power indicator can also report battery voltage to the nearest 0.1V

• A Built-in charging module charges Li-ion batteries rapidly through a micro USB port

•IncludesaNitecore18650battery(NL18343400mAh)

• Features intelligent memory function (except for SOS and location beacon modes)

• Reverse polarity protection prevents damage from incorrectly inserted batteries

•Toughenedultra-clearmineralglasswithanti-reectivecoating

•ConstructedfromaerogradealuminumalloywithHAIIImilitarygradehard-anodizednish

• Waterproof in accordance to IPX-8 (two meters submersible)

• Impact resistant to 1.5 meters

• Tail stand capability

Dimensions

Length: 139.2mm(5.48”)

HeadDiameter: 25.4mm(1”)

TailDiameter: 25.4mm(1”)

Weight: 87g (3.07oz)

Accessories

Nitecore18650battery(NL18343400mAh),USBchargingcable,holster,clip,tacticalring,

lanyard, spare rubber cover, spare O-ring, spare USB port cover

Battery Options

SIZE Nominal voltage Compatible

18650 Rechargeable

Li-ion battery 18650 3.7V Yes (Recommended and can

be recharged)

Primary Lithium

battery CR123 3V Yes (Compatible but can NOT

be recharged)

Rechargeable Li-ion

battery RCR123 3.7V Yes (Compatible but can NOT

be recharged)

* Charge 18650 rechargeable Li-ion batteries only. Do not charge CR123 or RCR123 Warning:

batteries.

Output & Runtime

FL1 STANDARD HIGH MID ULTRALOWLOW

1000

LUMENS

280

LUMENS

LUMEN

1X18650 *1h15min 6h 28h 520h

2XCR123 *1h 3h15min 20h 300h

320m (Beam Distance)

25700cd (Peak Beam Intensity)

1.5m

IPX8, 2m ( Waterproof AND Submersible)

NOTE: Theabovedatahasbeenmeasuredinaccordancewiththeinternationalashlight

testingstandardsANSI/NEMAFL1,using1xNitecore18650battery(3.7V,3400mAh)or2xCR123

batteries (3V, 1700mAh) under laboratory conditions. The data may vary in real-world use due

todierentbatteryuseorenvironmentalconditions.

*Runtime for High Mode is calculated based on theoretical arithmetic.

Operating Instructions

Battery Installation

Insert one 18650 battery or two CR123 batteries as illustrated.

WARNING

1. Ensure batteries are inserted with the positive (+) end pointing

to the head. The MH12GT will not operate with incorrectly inserted

batteries.

2. Avoid direct eye exposure to the beams.

Momentary illumination

Pressthetailcapswitchhalfwaytoswitchthelighton.Simplyreleasetoswitchthelighto.

ON/OFF

To switch ON: Press the tail cap switch all the way down until a “click” is heard

To switch OFF: Press the tail cap switch all the way down again until a “click” is heard

Brightness Levels

With the light switched on, press the mode switch repeatedly to cycle through brightness levels

of ultra-low, low, medium and high.

Note: When in high output, the MH12GT will reduce output luminance automatically after 1

minute of use to prevent overheating and extend battery longevity.

ATR

With Advanced Temperature Regulation module, the MH12GT regulates its output and adapts to

the ambient environment, maintaining optimal performance.

Special Modes (Strobe/SOS/Location Beacon)

When the light is on, press and hold the mode switch for over one second to enter strobe

mode; when in strobe mode, press and hold the mode switch for over one second again to cycle

through SOS, location beacon and strobe modes. To exit and revert to the brightness level last

used, simply press the mode switch.

Note: The MH12GT memorizes its previously brightness level as well as strobe mode the next

time it is turned on. (Except for SOS and Location Beacon modes)

Charging Function

The MH12GT can charge an 18650 Li-ion battery with the included USB charging cable by

following the steps below.

1. Click the tail switch to turn on the light.

2. Connect the USB cable to the MH12GT's charging port and a power source (USB chargers, PC

or other power terminals) as shown in the adjacent image.

Fully charging a depleted 18650 battery takes approximately 6 hours.

Undernormalchargingconditions,thebluepowerindicatorlightwillashoncepersecond.

If CR123/RCR123s are inserted, or there is no battery inserted, or the tail switch is not at the “on”

position,thebluepowerindicatorlightwillashrapidlytonotifyusers.

When charging is complete, the MH12GT will terminate the charging process automatically and

the blue power indicator goes out.

Power Tips

1. When the light is on, the power indicator will blink once every two seconds when power level

drops to 50%; the power indicator will blink quickly when power level is low.

2.Whenthelightiso,presstailcapswitchwhileholdingdownthemodeswitchtoactivate

the power indicator light to report battery voltage (accurate to ±0.1V). For example, when the

batteryvoltageisatamaximumchargeof4.2V,thepowerindicatorwillblink4times,followed

by a one second pause and 2 more blinks before entering the previously used brightness.

Dierentvoltagesrepresentthecorrespondingremainingbatterypowerlevels:

1×18650 battery:

2×CR123 batteries:

Changing Batteries

Batteries should be recharged or replaced if any of the followings occurs: The power indicator

blinksrapidly;outputappearstobedimortheashlightbecomesunresponsive.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-

based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. DOA/defective products can be exchanged

for replacement through a local distributor/dealer within the 15 days of purchase.

After 15 days, all defective / malfunctioning NITECORE ® products will be repaired free

of charge for a period of 60 months from the date of purchase. After 60 months, a limited

warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or

replacementparts.Thewarrantyisnulliedinallofthefollowingsituations:

1.Theproduct(s)is/arebrokendown,reconstructedand/ormodiedbyunauthorizedparties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please contact your national

NITECORE® distributor or send an email to service@nitecore.com

TheNitecoreocialwebsiteshallprevailincaseofanyproductdatachanges.

Low power Full power

3.5V 3.7V 3.9V 4.2V

Low power Full power

4.8V 5.6V 6.0V 6.4V

Pleasendusonfacebook:NitecoreFlashlight

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: info@nitecore.com

Web: www.nitecore.com

Address: Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District,

Guangzhou,510623, Guangdong, China

Thanks for purchasing NITECORE!

20170412

Specyfikacje produktu

Marka:	Nitecore
Kategoria:	Flesz
Model:	MH12GT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nitecore MH12GT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Flesz Nitecore

Nitecore NU05 MI Instrukcja

8 Marca 2025

Nitecore MT21C Instrukcja

29 Grudnia 2024

Nitecore Thumb Instrukcja

29 Grudnia 2024

Nitecore GEM10 Instrukcja

29 Grudnia 2024

Nitecore EC4GTS Instrukcja

29 Grudnia 2024

Nitecore MT42 Instrukcja

29 Grudnia 2024

Nitecore P16TAC Instrukcja

29 Grudnia 2024

Nitecore T2s Instrukcja

29 Grudnia 2024

Nitecore DL10 Instrukcja

29 Grudnia 2024

Nitecore HC30 Instrukcja

29 Grudnia 2024

Instrukcje Flesz

Najnowsze instrukcje dla Flesz

Olight S2R Baton II Instrukcja

9 Kwietnia 2025

Olight Gober Kit Instrukcja

9 Kwietnia 2025

SureFire STILETTO PRO II Instrukcja

3 Kwietnia 2025

Olight iTHX Instrukcja

2 Kwietnia 2025

Olight OPen Pro Instrukcja

30 Marca 2025

Olight Baton 3 Pro Max Instrukcja

30 Marca 2025

Pelican 7620 Instrukcja

30 Marca 2025

Pelican 7100 Instrukcja

30 Marca 2025

Makita BML360 Instrukcja

29 Marca 2025

NEO Tools 99-045 Instrukcja

29 Marca 2025