Instrukcja obsługi Nitecore TM06S
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nitecore TM06S (2 stron) w kategorii Flesz. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.4 gwiazdek
Strona 1/2
TM06S
Features
• Compact and lightweight 4000 Lumens flashlight
• Utilizes four CREE XM-L2 U3 LEDs
• Uses four 18650 batteries for maximum runtime up to 560 hours
• Features advanced temperature regulation (ATR) technology
• Innovative two-stage side switch accesses various modes and
functions (Chinese Patent: ZL201120062948.1)
• Integrated power indicator in side switch indicates remaining battery
power (Chinese Patent: ZL201220057767.4)
• Power indicator displays battery voltage accurate to 0.1V
• Intelligent memory function for brightness levels
• Direct access to ultralow and turbo outputs
• Toughened ultra-clear mineral glass with anti-reflective coating
• Integrated “Precision Digital Optics Technology” provides extreme
reflector performance
• Stainless steel bezel ring protects core components from damage
• Constructed from aerospace grade aluminum alloy
• HAIII military grade hard-anodized
• Waterproof in accordance with IPX-8 (submersible to 2 meters)
• Tail stand capability
Dimensions
Length: 4.74” (117mm)
Head diameter: 1.97” (50mm)
Tube diameter: 1.97” (50mm)
Weight: 9.39oz (266g) (without batteries)
Battery Options
NOTE: After loading batteries, the power indicator light will blink to
indicate battery voltage. Please refer to “Power Tips” section of this
manual for details
WARNING:
1. Do not mix batteries of different types/brands.
2. When the TM06S is stored in a backpack or left unused for extended
periods, Nitecore recommends the tailcap is loosened to cut off the power
entirely, thus preventing accidental activation of the flashlight.
On/Off Operation
To turn on: press the side switch all the way down until a “click” is heard;
To turn off: press the side switch all the way down again until a “click” is
heard to turn the light off and enter standby mode.
Standby mode: In standby mode, press the side switch partway down to
activate the power indicator to flash once every three seconds, thus
helping users locate the flashlight in dark conditions. To turn off the power
indicator, press the side switch half way down again.
In standby mode, the TM06S operates for up to 40 days with the power
indicator on and up to 138 days with the power indicator off.
Brightness Levels
With the light turned on, press the side switch partway down repeatedly
to cycle through lower, low, medium, high and turbo brightness
levels.TM06S has memory effect for brightness levels. When the
flashlight is turned on, it will resume on the brightness level last used.
Direct Accesses to Lower/Turbo
In standby mode, press and hold side switch partway down to enter lower
mode (3 lumens).
In standby mode, press and hold the side switch all the way down to
enter turbo mode (4000 lumens)
Special Modes (Strobe/Location Beacon/SOS)
With the light turned on, press and hold the side switch all the way down
for more than one second to enter Strobe mode. To cycle through SOS,
NOTICE:
The above data has been measured in accordance with the international
flashlight testing standards ANSI/NEMA FL1 using 4 x 3.7V 3400mAh
18650 batteries under laboratory conditions. The data may vary slightly
during real-world use due to battery type, individual usage habits and
environmental factors.
Operating Instructions
Battery Installation
1. Insert batteries with the positive (+) and negative (-) ends
corresponding to the diagram on the inside of the battery compartment.
2. Tighten the tailcap by aligning the two metal pins on the tailcap with the
corresponding holes on the flashlight body, and rotate clockwise.
*Warning: Do not use the TM06S with RCR123 or CR123 batteries.
Otherwise the flashlight may be damaged.
Output & Runtime
Accessories
Quality holster, lanyard,
spare O-ring
TURBO
HIGH MID LOW LOWER
LUMENS
4000
LUMENS
1500
LUMENS
480
LUMENS
160
LUMENS
3
1h11 15 n 32h 560hh mi
4
h
359m (Beam Distance)
32,300cd (Peak Beam Intensity)
1.5m (Impact Resistant)
IPX-8, 2m
(Waterproof AND Submersible)
Thanks for purchasing NITECORE!
User Manual
®
The All-Round Flashlight Expert
TYPE
Nominal voltage
Compatible
Primary Lithium battery CR123 3V NO
18650 Rechargeable Li-ion battery 18650 3.7V Yes
(Recommended)
Rechargeable Li-ion battery RCR123 3.7V NO
Specyfikacje produktu
| Marka: | Nitecore |
| Kategoria: | Flesz |
| Model: | TM06S |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Nitecore TM06S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Flesz Nitecore
8 Marca 2025
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
Instrukcje Flesz
- Parat
- HQ
- MOON
- Kogan
- ArmyTek
- Coleman
- Silverline
- Black & Decker
- Nedis
- Silva Schneider
- Steren
- Makita
- CEL-TEC
- Pyle
- Black Diamond
Najnowsze instrukcje dla Flesz
9 Kwietnia 2025
9 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
29 Marca 2025
29 Marca 2025