Instrukcja obsługi Nitecore TM28
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nitecore TM28 (2 stron) w kategorii Flesz. Ta instrukcja była pomocna dla 31 osób i została oceniona przez 16 użytkowników na średnio 3.9 gwiazdek
Strona 1/2
LUMENS
6000
LUMENS
4500
LUMENS
2300
LUMENS
1000
LUMENS
320
LUMENS
2
LUMENS
2
LUMENS
320
LUMENS
1000
LUMENS
2300
*4
5
min
*2
h
4
h
30
min
11
h
15
min
1000
h
1000
h
14
h
30
min
5
h
*2
h
15
min
*1
h
655m
(Beam Distance)
107,200cd
(Peak Beam Intensity)
1m
(Impact Resistant)
IPX8, 2m
(Waterproof AND Submersible)
TURBO HIGH MID LOW Ultralow
4×Li-ion 18650 4× IMR 18650
TYPE Nominal voltage Compatible
IMR18650 18650 3.6V
Li-ion 18650 18650 3.7V
Yes (Recommended)
Yes (Recommended)
Yes (Recommended)
NBP68 High Discharge Batt Pack 3.7V
Accessories
Holster, adaptor, lanyard, O-ring, charging
port cover, flat top battery connector
Features
·Rechargeable searchlight
·Utilises 4 CREE XHP35 HI LEDs, max output up to 6000 lumens
·Powered by 4 18650 batteries, compatible with li-ion/IMR batteries
·Max runtime up to 1000 hours
·Max throw up to 655 metres
·Onboard OLED display provides real-time data for brightness, battery power, voltage
·Reflectors with PDOT incorporated
·Intelligent charging circuit
·Temperature regulation to prevent overheating
·5 brightness levels and 3 special functions available
·Dual-stage multi-functional single switch provides access to all functions (Patent No.
ZL201120062948.1)
·Built-in power indicator to report battery level (Patent No. ZL201220057767.4)
·Onboard tripod receptacle
·Mineral optic lenses with anti-reflective coating
·Retaining rings protect core components from damages
·Made from aerospace grade aluminium alloy
·HAIII hard anodising
·Waterproof in accordance with IPX8 (2 metres submersible)
·Tail stand
Dimensions
Length: 5.59”
Head: 2.23”x 2.23” (Height/Width)
Tail diameter: 1.97”
Weight: 14.6oz (battery excluded)
Bettery options
WARNING：Must not be used with CR123/RCR123 batteries.
*Nitecore 18650 are recommended to ensure complete compatibility.
Output & Runtime
NOTE:The stated data has been measured in accordance with the international flashlight
testing standards ANSI/NEMA FL1, using 4x IMR18650 batteries (3.6V, 3100mAh) or 4 x
Li-ion 18650 batteries (3.7V, 3400mAh) under laboratory conditions. The data may vary in
real-world use due to different battery use or environmental conditions.
* Runtimes for turbo and high are calculated based on theoretical arithmetic.
* To use the 6000 lumens output, all 18650 batteries must be rechargeable and have at
least 8A discharge current each or use with NITECORE NBP68HD battery pack.
Battery installation
Insert four 18650 Li-ion or four 18650 IMR batteries with the positive terminal pointing towards
the correct direction, as illustrated in the diagram below. When using flat top 18650 batteries,
ensure the flat top battery connector is placed on the positive terminal of the batteries.
WARNING ：
1. Insert batteries with polarity pointing towards the right direction as labelled on inside of the
battery compartment, incorrectly inserted batteries will render the product inoperative and
poses risk of short-circuiting.
2. When using flat top IMR batteries, ensure the flat top battery connector is placed on top of
the positive terminal.
3. It is not recommended to use the product with less than 4 x 18650 batteries, this may cause
the product to function improperly and shorten battery life span.
®
The All-Round Flashlight Expert
TM28 User Manual
Thanks for purchasing NITECORE!
4. Do not mix batteries of different brands/types and different capacity.
Battery selection
Upon each battery installation, a battery selection prompt comes up on the OLED display,
select the correct battery type by pressing the display switch and press the power switch to
confirm:
1. Li-ion. Regular rechargeable li-ion batteries allowing for max output of 4500 lumens.
2. IMR. High discharge li-ion batteries allowing for max output of 6000 lumens.
3. Batt Pack. NBP68HD, optional battery pack allowing for max output of 6000 lumens.
If no action is taken for 10 seconds after battery installation, the OLED display will enter
standby mode.
Operating instructions
Note: This product uses a two-stage power switch, access to its various functions depends on
the extent the switch is pressed.
ON/OFF
With the light turned off, pressing the power switch partway or all the way down will turn the
light on, press the switch all the way down again to turn the light off.
Modes
The TM28 comes with 2 modes:
-Daily mode: This mode has 4 brightness levels, press the switch partway down to turn the
light on in daily mode, pressing the switch partway down repeatedly cycles
the brightness through Ultralow-Low-Mid-High, this mode has memory
feature.
-Search mode: This mode has 2 brightness levels, press the power switch all the way
down to turn the light on in search mode, pressing the switch partway
down cycles brightness through High-Turbo. Alternatively, hold the switch
all the way down to turn the light on at “Turbo”, releasing the switch turns
the light off.
Special functions
With the light turned on, press the switch twice in quick succession to enter strobe, press the
switch partway down repeatedly to cycle through Strobe-SOS-Beacon, press the switch all the
way down to turn the light off.
OLED display
This product has an onboard OLED display that provides real-time operating data:
1. When the light is turned on at level 1-5, a series of data sets will be shown in the order of
brightness level-battery voltage-battery level-remaining runtime-operating
temperature-standby, with a 1.8 second delay before the next data set comes up on display.
2. When using any of the special functions, the name of the function will be displayed.
Lockout
With the light turned on, hold down the switch for 1 second to enter lockout mode, this is
designed to prevent accidental activation. To unlock, hold down the switch for 1 second again.
Batteries are expected to last for 12 months in lockout mode.
Caution: Correct battery type must be selected upon battery installation, setting
battery type to IMR while using regular 18650 li-ion batteries may render the
product inoperative when switching to turbo (when OLED shows 6000 lumens).
Solution: Reinstall batteries and select the correct battery type when prompted.
To guarantee the best user experience, it is recommended to use NITECORE
IMR18650 batteries.
Specyfikacje produktu
| Marka: | Nitecore |
| Kategoria: | Flesz |
| Model: | TM28 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Nitecore TM28, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Flesz Nitecore
8 Marca 2025
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
Instrukcje Flesz
- Energizer
- 4K5
- Nebo
- Ledlenser
- Ferm
- Alecto
- Makita
- Craftsman
- NightStick
- SilverCrest
- Aluratek
- Fenix
- KSE-Lights
- Olympia
- Garmin
Najnowsze instrukcje dla Flesz
9 Kwietnia 2025
9 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
29 Marca 2025
29 Marca 2025