Instrukcja obsługi Olympia RG850
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Olympia RG850 (2 stron) w kategorii Flesz. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.7 gwiazdek
Strona 1/2
Congratulations on your purchase of the Olympia
RG850 CREE XML LED high-performance, high
durability flashlight. The Olympia brand is
synonymous with integrity. Our word is our bond.
As a result, this product is designed to provide you
with the best possible functionality. Its innovative
CREE XML LED technology is geared for optimum
effectiveness and high efficiency. Its ability to
endure rugged use is enabled by the aircraft-grade
aluminum with premium type III hard anodized
anti-abrasive finish. This represents the industry’s
top tier in durable finishes. It is lightweight and
compact in design making it a great option for
portability. Use it in any situation - hunting, hiking,
camping, caving, general household, recreational
activities, rugged sports, industrial worksite or
emergency situations. Please take a few moments
to read this user guide to ensure that you get the
best performance and years of trouble-free use.
Product Description
Battery Installation
1. Unscrew the tail switch cap and insert 1x18650
rechargeable (NiMH) batteries (included). The
(+) terminal on the batteries should face toward
the flashlight’s head.
2. Replace the tail switch cap and be sure to
tighten snugly, but do not over tighten as this
could strip the threads in the cap. Turn on the
flashlight as indicated in any of the options
listed in the table that follows. Note: If the tail
cap is not tightened snugly, the flashlight
will not turn on.
How to charge the RG850
1. The RG850 will blink to indicate the battery is
nearly depleted and needs to be charged.
2. Make sure the flashlight is turned off.
3. Unscrew the head of the flashlight to reveal the
micro USB charging port.
4. Connect the RG850 to a power outlet using the
included cable. The LED light next to the USB
port will illuminate green to indicate you have
power to the flashlight.
5. Once you see the green light, turn the flashlight
on by clicking the button on the tail cap once.
The light will turn red to indicate the battery is
charging.
6. Once the battery is fully charged, the light will
turn green.
7. Charging time is approximately 8 hours.
Olympia RG850
CREE XML LED
Flashlight
User Guide
Flashlight Operation
Your high-Olympia RG850 CREE XML LED
performance, high durability flashlight has a
push-button tail switch for on/off operation and is
equipped with 1) Momentary and 2) Continuous
light options. It also has 5 illumination light modes
to suit your varied needs. See table instructions
that follow to access these functionalities:
Lighting Operation Modes
Momentary-on
Lighting
Press the push-button tail switch
half-way to activate the light
momentarily.
Continuous
Lighting
Press the tail switch push-button to
completely turn on the flashlight.
The light will stay on until the push-
button is turned off.
Lighting Modes
There are five types of light output:
High Middle
Low Strobe SOS
Press the tail push-button to switch
to each mode
Accessing the 5 Lighting Modes
High Beam Press the push-button tail
switch once
Mid Press the push-button tail
switch twice
Low Beam Press the push-button tail
switch 3 times
Strobe Press the push-button tail
switch 4 times
SOS Press the push-button tail
switch 5 times
Memory function
Your Olympia RG850 CREE XML LED
high-performance, high durability flashlight
automatically memorizes the last light setting/
mode used when the flashlight next is turned on.
i.e., after being in any one of the five light settings
(High Middle Strobe SOS) for 3 Low
seconds, the last one used will be memorized.
Maintenance and Precautions
1. Do not disassemble the sealed head. Doing
so can cause damage to the flashlight and will
void the warranty.
2. Use high-quality batteries or you run the risk
of the flashlight being damaged by electrolyte
leakage or battery breakage.
3. If the flashlight will not be used for a long time,
remove the batteries to avoid damage caused
from battery leakage.
4. Lubricate the O-rings regularly using a
Q-Tip®. Apply a small dab of silicone grease
or petroleum jelly to the contacts to prevent
corrosion. Doing so will keep the flashlight
properly sealed against water. If the O-rings are
damaged after prolonged use, replace them.
5. Clean the flashlight contacts periodically
especially if the light flickers or does not light
up. There are different reasons for a flickering or
non-working light:
A: The batteries may need to be replaced.
Solution: Replace old/defective batteries with
new ones (be sure to double check correct
installation of + and - terminals).
B: The threads, PCB board contact or other
contacts are dirty.
Solution: Use a Q-Tip® to apply a tiny amount
of alcohol to clean the contact points.
Switch
Tail
CapClip
Lanyard
Hole
BodyHead
Specyfikacje produktu
| Marka: | Olympia |
| Kategoria: | Flesz |
| Model: | RG850 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Olympia RG850, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Flesz Olympia
15 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024
14 Września 2024
14 Września 2024
13 Września 2024
12 Września 2024
12 Września 2024
11 Września 2024
Instrukcje Flesz
- Milwaukee
- Underwater Kinetics
- HiKOKI
- Nitecore
- Maverick
- Pyle
- SuperNova
- Silva
- Rocktrail
- NightStick
- Varta
- Anker
- Little Tikes
- Stanley
- Hama
Najnowsze instrukcje dla Flesz
9 Kwietnia 2025
9 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
29 Marca 2025
29 Marca 2025