Instrukcja obsługi PCE Instruments PCE-IT 120
PCE Instruments
Sprzęt pomiarowy
PCE-IT 120
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PCE Instruments PCE-IT 120 (10 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.5 gwiazdek
Strona 1/10
© PCE Instruments
PCE-IT 120 Insulation Test er
User Manual
User manuals in various languages (français,
italiano, español, português, nederlands, türk, polski,
русский, 中文
中文
中文
中文中文) can be found by using our
product search on: www.pce-instruments.com
Last change: 15 August 2019
v1.0
English
© PCE Instruments
Contents
1 Safety notes ........................................................................................... 1
2 Delivery contents .................................................................................. 3
3 Specications ........................................................................................ 3
4 Short product description .................................................................... 4
5 Functions ............................................................................................... 5
5.1 [ON/TEST] key (on/o function) ........................................................................................ 5
5.2 Battery test ....................................................................................................................... 5
5.3 Voltmeter 5..........................................................................................................................
5.4 Auto Hold ......................................................................................................................... 5
5.5 250 V, 500 V, 1 kV insulation resistance measurement .................................................... 5
5.6 [ON/TEST] key (measuring function) ................................................................................ 5
5.7 EnerSave function ............................................................................................................ 6
5.8 [LOW ] key for continuity tests Ω....................................................................................... 6
5.9 [LOW Ω] key for Auto Zero ............................................................................................... 6
5.10 [1000V] key for power o (Auto Power O) 6......................................................................
5.11 Automatic discharge after an insulation measurement ...................................................... 6
6 Safety checks before the measurement ............................................. 6
7 Changing the fuse ................................................................................. 6
8 Further information ............................................................................... 7
9 . 7 Contact ................................................................................................
10 Disposal ................................................................................................. 7
© PCE Instruments
1
1 Safety notes
Please read this manual carefully and completely before you use the device for the rst time. The
device may only be used by qualied personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and
not covered by our warranty.
• The device must only be used as described in this instruction manual. If used otherwise,
this can cause dangerous situations for the user and damage to the meter.
• The instrument may only be used if the environmental conditions (temperature, relative
humidity, …) are within the ranges stated in the technical specifications. Do not expose
the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
• Do not expose the device to shocks or strong vibrations.
• The case should only be opened by qualied PCE Instruments personnel.
• Never use the instrument when your hands are wet.
• You must not make any technical changes to the device.
• The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner,
no abrasives or solvents.
• The device must only be used with accessories from PCE Instruments or equivalent.
• Before each use, inspect the case for visible damage. If any damage (crack in the case,
dama OLED, etc.) is visible or an insulation damage at the test leads (bare wires) ged
is apparent, do not use the device and the test leads.
• Do not use the instrument in explosive atmospheres.
• The measurement range as stated in the specications must not be exceeded under
any circumstances.
• Non-observance of the safety notes can cause damage to the device and injuries to
the user.
• Measurements with the insulation tester may only be made by qualied sta and in line
with the requirements described in the manual. Damage caused by improper use of the
meter, non-observance of general safety regulations or of the instructions in the manual
are not covered by the warranty.
• Only replace defective fuses by an equal equivalent.
• The insulation tester fulls the general safety regulations. However, these do not protect
the user from improper use of the meter and the resulting hazards. When measuring
voltages above 24 V, there is a risk of electric shock. Therefore, high-voltage
measurements should be made very carefully and not without observing the applicable
safety regulations. Non-observance of the safety notes can be life-threatening!
• The parts of the manual that contain information and warnings about possible hazards
related with certain measuring operations must be observed.
• When connecting the meter to a live circuit or line, a pulsating alarm tone will sound.
Immediately disconnect the insulation tester from the circuit or line when you hear the
alarm sound. Additionally, a warning indicator will be displayed on the OLED.
• Operating conditions
Indoor use only (not suitable for outdoor use)
Pollution degree 2
Max. elevation: 2000 m
Max. air humidity: 80 % RH
Operating temperature range: 0 ... 40 °C
Specyfikacje produktu
| Marka: | PCE Instruments |
| Kategoria: | Sprzęt pomiarowy |
| Model: | PCE-IT 120 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z PCE Instruments PCE-IT 120, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Sprzęt pomiarowy PCE Instruments
29 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
Instrukcje Sprzęt pomiarowy
- Sprzęt pomiarowy ORNO
- Sprzęt pomiarowy X-Rite
- Sprzęt pomiarowy Brookhuis
- Sprzęt pomiarowy Peak
- Sprzęt pomiarowy Blebox
- Sprzęt pomiarowy Güde
- Sprzęt pomiarowy Fantini Cosmi
- Sprzęt pomiarowy Condtrol
- Sprzęt pomiarowy Amprobe
- Sprzęt pomiarowy Beckmann & Egle
- Sprzęt pomiarowy Softing
- Sprzęt pomiarowy Trotec
- Sprzęt pomiarowy Dostmann Electronic
- Sprzęt pomiarowy Hikmicro
- Sprzęt pomiarowy Megger
Najnowsze instrukcje dla Sprzęt pomiarowy
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025