Instrukcja obsługi Planet FSD-504HP
Planet
przełącznik
FSD-504HP
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Planet FSD-504HP (4 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.6 gwiazdek
Strona 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Check the following contents of your package:
Fast Ethernet High Power PoE Switch x 1
User's Manual x 1
Power Adapter x 1
Power Cord x 1
Rubber Feet x 4
If any of these are missing or damaged, please contact
your dealer immediately; if possible, retain the carton
including the original packing material, and use them
again to repack the product in case there is a need to
return it to us for repair.
4. LED Indicators
System
LED Color Function
PWR Green Light: Indicates the Switch has
power.
Per 10/100Mbps Port
LED Color Function
PoE Orange
Light: Indicates the port is
providing 48V DC in-line
power.
LNK/ACT Green
Light: Indicates the link
through that port is
successfully established
at 10/100Mbps.
Blink: Indicates that the Switch
is actively sending or
receiving data over that
port.
2. Product Features
RJ-45 Interface
Five 10/100Mbps Fast Ethernet ports
4 ports support 48V DC power to PoE Powered
Device
Power over Ethernet
Complies with IEEE 802.3af / at Power over
Ethernet Mid-Span PSE
Up to 4 IEEE 802.3af / at devices powered
Supports PoE Power up to 30 watts for each PoE
port
60 watts PoE Budget
Auto detects powered device (PD)
Circuit protection prevents power interference
between ports
Remote power feeding up to 100m
Switching
Hardware based 10/100Mbps Auto-Negotiation and
Auto MDI/MDI-X
Flow control for Full Duplex operation and back
pressure for Half Duplex operation
1536Bytes packet size support
Integrates address look-up engine, supporting 1K
absolute MAC addresses
Automatic address learning and address aging
Hardware
Desktop palm size
LED indicators for PoE ready / activity and LINK /
ACT
One DC 48V power jack
5. Switch Rear Panel
Figure 5-1 shows the rear panel of FSD-504HP.
Figure 5-1: FSD-504HP Rear Panel
Power
Notice
1. The device is a power-required device,
meaning it will not work till it is powered.
If your networks should be active all the
time, please consider using UPS (Uninter-
rupted Power Supply) for your device. It
will prevent you from network data loss
or network downtime.
2. In some area, installing a surge suppres-
sion device may also help to protect your
FSD-504HP from being damaged by un-
regulated surge or current to the FSD-
504HP or the power adapter.
3. Switch Front Panel
Figure 3-1 shows the front panel of FSD-504HP.
Figure 3-1: FSD-504HP Front Panel
6. Installing the Switch
This part describes how to install your Fast Ethernet
High Power PoE Switch and make connections to
it. Please read the following topics and follow the
procedures as presented.
Note
This Fast Ethernet High Power PoE Switch
does not need software configuration.
Desktop Installation
To install the Fast Ethernet High Power PoE Switch on
desktop, simply follow the following steps:
Step 1: Attach the rubber feet to the recessed areas
on the bottom of the Fast Ethernet High Power
PoE Switch.
Step 2: Place the Fast Ethernet High Power PoE Switch
on desktop near AC power source for its power
adapter.
Step 3: Keep enough ventilation space between the
Fast Ethernet High Power PoE Switch and the
surrounding objects.
Note
When choosing a location, please keep in
mind the environmental restrictions dis-
cussed in Chapter 7 -- Product Specifica-
tions.
Step 4: Connect your Fast Ethernet High Power PoE
Switch to network devices.
A. Connect one end of a standard network cable to
the 10/100Mbps RJ-45 ports on the back of the
Fast Ethernet High Power PoE Switch.
B. Connect the other end of the cable to the network
devices such as printer servers, workstations or
routers.
Step 5: Connect your Fast Ethernet High Power PoE
Switch to PoE PD devices.
A. Connect one end of a standard network cable to
port 2 to port 4 10/100Mbps RJ-45 ports on the
back of the Fast Ethernet High Power PoE Switch.
B. Connect the other end of the cable to the 802.3at
/ af powered devices.
Office Building
Office Building Office Area
Warehouse
Control Room
Speed Dome
IEEE 802.3af
PoE IP Camera
PoE Extender
IEEE 802.3af PoE
VoIP Phone
IEEE 802.3af
PoE IP Camera
IEEE 802.3at
PoE Splitter
FSD-504HP
DC
PoE
PoE
PoE
PoE
DC Power Line (DC)
100Base-TX UTP
PoE
100Base-TX UTP with PoE
Specyfikacje produktu
| Marka: | Planet |
| Kategoria: | przełącznik |
| Model: | FSD-504HP |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Planet FSD-504HP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje przełącznik Planet
5 Października 2024
5 Października 2024
5 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
Instrukcje przełącznik
- Kramer
- Omnitronic
- Honeywell
- Iogear
- WHALE
- DoorBird
- Boss
- Kopp
- AV:link
- Ei Electronics
- One For All
- IFM
- Cooking Performance Group
- KanexPro
- Blustream
Najnowsze instrukcje dla przełącznik
9 Kwietnia 2025
9 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025