Instrukcja obsługi Planet GSD-1603

Planet przełącznik GSD-1603

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Planet GSD-1603 (4 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 4.3 gwiazdek

Pobierz PDF

Strona 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Check your package for the following items:

GSD-1603 x 1 DC 12V,

1A Power Adapter x 1 User’s Manual x 1

If any of these are missing or damaged, please contact

your dealer immediately; if possible, retain the carton

including the original packing material, and use them again

to repack the product in case there is a need to return it to

us for repair.

Hardware Features

 Made of metal, desktop size and wall-mount design

 LED indicators for system power, per port Link/Act

 12V DC, 1A external power adapter

 FCC, CE Class B compliant

6. Installing the Switch

This part describes how to install your GSD-1603 Gigabit

Ethernet Switch and make connections to it. Please read

the following sections and perform the procedures in the

order being presented.

Note: This GSD-1603 Gigabit Ethernet Switch does not

need software conguration.

Desktop Installation

To install the GSD-1603 on desktop, simply follow the

following steps:

Step 1: Place the GSD-1603 on the desk near a power

source.

Step 2: Keep some ventilation space between the

GSD-1603 and the surrounding objects.

Note

When choosing a location, please keep in mind

the environmental restrictions discussed in

Chapter 7 under Product Specifications.

Step 3: Connect your GSD-1603 to network devices.

A. Connect one end of a standard network cable

to the 10/100/1000BASE-T RJ45 ports on the

rear panel of the GSD-1603.

4. LED Indicators

System

LED Color Function

PWR Green

Lights Indicates that the Switch is powered

ON.

Off Indicates that the Switch is powered

OFF.

Per 10/100/1000Mbps Port

LED Color Function

Link/

ACT Green

Lights

Indicates the link through that

port is successfully established at

10/100/1000Mbps.

Blinking

Indicates the Switch is actively

sending or receiving data over

that port.

2. Product Features

Physical Port

 16-Port 10/100/1000BASE-T Gigabit Ethernet ports

 Supports auto MDI/MDI-X function

Layer 2 Features

 Complies with IEEE 802.3, 10B -T, IEEE ASE 802.3u

100BASE-TX, IEEE 802.3ab 1000B -T Ethernet stan ASE -

dards

 Features Store-and-Forward mode with wire-speed

ltering and forwarding rates

 Integrated address look-up engine, supporting 8K

absolute MAC addresses

 9K Jumbo packet support

 IEEE 802.1Q VLAN packet transparent support

 IEEE 802.3x ow control for full duplex operation and

backpressure for half duplex operation

 Hardware based 10/100B -TX, half/full duplex and ASE

1000BASE-T full duplex mode, ow control and auto-

negotiation

 Automatic address learning and address aging

 Supports CSMA/CD protocol

3. Switch Front Panel

Figure 3-1 shows the front panel of the GSD-1603

Figure 3-1: GSD-1603 Front Panel

5. Switch Rear Panel

Figure 5-1 shows the rear panel of the GSD-1603

Figure 5-1: GSD-1603 Rear Panel

Power

Notice

1. The device is a power-required device,

meaning it will not work till it is powered. If

your networks should be active all the time,

please consider using UPS (Uninterrupted

Power Supply) for your device. It will prevent

you from network data loss or network

downtime.

2. In some areas, installing a surge suppression

device may also help to protect your Switch

from being damaged by unregulated surge or

current to the Switch or the power adapter.

B. Connect the other end of the cable to the

network devices such as printer servers,

workstations, routers, etc.

Step 4: Supply power to the GSD-1603.

A. Connect one end of the power cable to the

GSD-1603.

B. Connect the 12V DC power adapter to a

standard wall outlet.

When the GSD-1603 receives power, the Power LED should

remain solid Green.

PC/Laptop

xDSL/Cable RouterInternet

12V Power Adapter

RJ45

Power

- 9 -

- 10 -

- 11 -

- 12 - - 13 - - 14 -

Wall-mount Installation

Step 1: Please nd the wall that can mount the GSD-1603.

Step 2: Install two screws on the wall.

Step 3: Hang the GSD-1603 on the screws from the wall.

Step 4: Repeat step 4 of Desktop Installation for power

supply to the GSD-1603.

Note

Before mounting the device to the wall, please

check the location of the electrical outlet and

the length of the Ethernet cable.

RJ45

UTP Cable

12V Power

Adapter

Throughput

(packet per second) 23.8Mpps@64Bytes

Jumbo Frame 9K

Standards Conformance

Standards Compliance

IEEE 802.3 (Ethernet)

IEEE 802.3u (Fast Ethernet)

IEEE 802.3ab (Gigabit Ethernet)

IEEE 802.3x (Full-duplex Flow

Control)

IEEE 802.3az Energy Efcient

Ethernet (EEE)

Regulatory Compliance FCC Part 15 Class B, CE

Environments

Temperature Operating: 0~50 degrees C

Storage: -10~70 degrees C

Humidity

Operating: 5% to 95%,

Storage: 5% to 95%

(non-condensing)

7. Product Specications

Product GSD-1603

Hardware Specications

10/100/1000BASE-T

Ports 16 auto MDI/MDIX ports

LED Display One for Power, one for Link/Act

per port

Enclosure Metal

Dimensions

(W x D x H) 155 x 118 x 46 mm

Weight (g) 538g

Power Requirements

(External power

adapter)

12V DC, 1A

Power Consumption 10 watts/34 BTU

Switch Specications

Switch Processing

Scheme Store-and-Forward

Address Table 8K

Flow Control Back pressure half duplex, IEEE

802.3x pause frame full duplex

Switch Fabric 32Gbps

8. Cu tomer Support s

Thank you for purchasing PLANET products. You can browse

our online FAQ resource on PLANET Website rst to check

if it could solve your issue. If you need more support

information, please contact PLANET switch support team.

PLANET online FAQ :

http://www.planet.com.tw/en/support/faq.php?type=1

Switch support team mail address :

support_switch@planet.com.tw

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other

trademarks belong to their respective owners.

Specyfikacje produktu

Marka:	Planet
Kategoria:	przełącznik
Model:	GSD-1603
Kolor produktu:	Niebieski
Materiał obudowy:	Metal
Wysokość produktu:	46 mm
Szerokość produktu:	155 mm
Głębokość produktu:	118 mm
Waga produktu:	538 g
Certyfikaty:	FCC, CE
Maksymalne zużycie mocy:	10 W
Zasilacz sieciowy:	Tak
Standardy komunikacyjne:	IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Pełny dupleks:	Tak
Obsługa PoE:	Nie
Napięcie operacyjne:	12 V
Zakres temperatur (eksploatacja):	0 - 50 °C
Zakres wilgotności względnej:	5 - 95 %
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-10 - 70 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Prąd wyjściowy:	1 A
Obsługa sieci VLAN:	Tak
Prąd wejściowy:	1 A
Podstawowe przełączanie RJ-45 Liczba portów Ethernet:	16
Podstawowe przełączania Ethernet RJ-45 porty typ:	Gigabit Ethernet (10/100/1000)
Złącze zasilania:	DC-in jack
Obsługa 10G:	Nie
Wielkość tabeli adresów:	8000 wejścia
Przepustowość rutowania/przełączania:	32 Gbit/s
Montaż naścienny / rzutowanie na sufit:	Tak
Podpora kontroli przepływu:	Tak
Funkcje wirtualnej sieci LAN:	Tagged VLAN
Zgodny z Jumbo Frames:	Tak
Rozszerzenie Jumbo Frames:	9216
Technologia okablowania Copper Ethernet:	10BASE-T, 100BASE-TX, 1000BASE-T
Automatyczne MDI/MDI-X:	Tak
Store-and-forward:	Tak
Napięcie wejściowe DC:	12 V
Emisja ciepła:	34 BTU/h
Wspierany auto-learning adresów MAC:	Tak
Wspierany auto-aging adresów MAC:	Tak
Auto-Negocjacja:	Tak
Ilość portów Gigabit Ethernet:	16
Przepustowość:	23.8 Mpps